Date   

locked Re: Beginner Level 1 certification

Jim Seibyl
 

Sure no problem, I’ll be happy to walk you thru the rocksim, that’s what I use

“We need more boom.”

On Nov 23, 2017, at 7:39 AM, taugy via Groups.Io <taugy@...> wrote:

I have already purchased a PRECISION LOC IV and have found a How To video on the build. I'll need help with CP and CG. It will be on my winter build pile.


-----Original Message-----
From: Jim Seibyl <jseibyl@...>
To: MTMA <MTMA@groups.io>
Sent: Wed, Nov 22, 2017 2:43 pm
Subject: Re: [MTMA] Beginner Level 1 certification

Essential if you are thinking about a cert, fairly easy to determine using open rocket or rocksim.

I’ll be happy to assist with any questions, and would be happy to sign off on the flight when the time comes.

Best advice to keep it simple, just get it up and back, build for strength, if you are not comfortable with electronics, hold off.  You can use a 4 inch diameter design and keep it under 1500 feet without even a chute release.

“We need more boom.”

On Nov 22, 2017, at 2:04 PM, taugy via Groups.Io <taugy@...> wrote:

Thanks guys, we'll chat more hopefully December 2. Have a great THANKSGIVING!


-----Original Message-----
From: Jeff Kodysz <jeffk813@...>
To: MTMA <MTMA@groups.io>
Sent: Wed, Nov 22, 2017 11:33 am
Subject: Re: [MTMA] Beginner Level 1 certification

I second what Wolf said about a sim. OpenRocket is free. I personally use Rocksim but that's because I run Mac computers and OpenRocket is Java-based and is not always Mac-friendly. you can't beat the price though! I'm also embarking on a quest to reach Level 1. I just have to get off my caboose and do it! :) I think the hardest part is finding a local field that actually has launches.

Jeff

On Wed, Nov 22, 2017 at 11:25 AM, Wolfram v.Kiparski <astronwolf@...> wrote:
If you haven't already, start using a rocket design/simulator program.  I recommend OpenRocket.  Many people love RockSim.  I am very critical of RockSim.  Both have their strengths and weaknesses. 

You need to get comfortable with being able to accurately determine the Center of Gravity and Center of Pressure of your rocket. 

As for doing a Level 1 cert build that's pretty easy.  Buy kit.  Build kit.  Fly kit.  I scratch built an upscaled Big Bertha using a 3-inch mailing tube, plywood rings and fins I cut myself, and a nose cone I made out of fiberglass and epoxy.  Flew it with a mid-H motor.  Uneventful, nominal flight.  Flying an H motor is no big deal. 


locked Re: Group.io question

John Ulizzi
 

Thanks Wolf. This other group list is starting to simply not function, and we need to do something... 

Happy Thanksgiving Everybody !

John

Sent from my iPhone

On Nov 22, 2017, at 10:50 AM, Wolfram v.Kiparski <astronwolf@...> wrote:

Yes.  That was the reason.  Consider also that Yahoo was bought by Verizon, merged with AOL.... Yahoo faces an uncertain future. 

On Nov 22, 2017 10:11 AM, John Ulizzi <jaulizzi@...> wrote:
Hey Guys,

Please refresh my memory on why we changed over from YAhoogroups to Group.io

Another list I am on has been on Yahoogroups fro years, but it is starting to have technical problems. I was wondering if that was our reason for switching, and if so if I should recommend the same to my other group…

Thanks,

John U


On Nov 21, 2017, at 10:34 AM, Jeff Kodysz <jeffk813@...> wrote:

Thanks, John for generously offering to host this year's Christmas party!

Jeff

On Tue, Nov 21, 2017 at 10:14 AM, John Ulizzi <jaulizzi@...> wrote:
 Hi All,

Time to nail down the Christmas Party. It needs to be Saturday 12/9. Sorry to those that wanted it on the 16th, I had to pull that off the table for personal reasons.

So:

Sat, Dec 9, 2017

4:00 pm — ???


Pot Luck, I’ll ask everyone to bring a dish to share, please coordinate with me when you RSVP.

I will provide Pasta, Soft Drinks, and wine. Mark, Beer please, just as last year ?

We will also have a white elephant gift exchange, so keep that in mind when reviewing your build piles !

If this turns into a late night build session so much the better, BYOB to share for that. I have plenty, just always interested in trying new stuff…

Mark, would you please post this to the FB page as well.

Hope to see you all here !

Happy Thanksgiving,

John


On Nov 17, 2017, at 12:00 PM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Model Rocket Launch

When:
Saturday, 25 November 2017
12:00pm to 4:00pm
(GMT-05:00) America/New York

Where:
Ray Harmon Flying Field, 619 Bartlett Road, Aurora, OH

Description:
This is a regular model rocket launch to be conducted in accordance with the NAR Model Rocket Safety Code. In the event of poor flying conditions, the following Sunday will be the backup flying date. Stay tuned for last minute updates.

View Event.








locked Re: Beginner Level 1 certification

Tom Augustyn
 

I have already purchased a PRECISION LOC IV and have found a How To video on the build. I'll need help with CP and CG. It will be on my winter build pile.


-----Original Message-----
From: Jim Seibyl <jseibyl@...>
To: MTMA <MTMA@groups.io>
Sent: Wed, Nov 22, 2017 2:43 pm
Subject: Re: [MTMA] Beginner Level 1 certification

Essential if you are thinking about a cert, fairly easy to determine using open rocket or rocksim.

I’ll be happy to assist with any questions, and would be happy to sign off on the flight when the time comes.

Best advice to keep it simple, just get it up and back, build for strength, if you are not comfortable with electronics, hold off.  You can use a 4 inch diameter design and keep it under 1500 feet without even a chute release.

“We need more boom.”

On Nov 22, 2017, at 2:04 PM, taugy via Groups.Io <taugy@...> wrote:

Thanks guys, we'll chat more hopefully December 2. Have a great THANKSGIVING!


-----Original Message-----
From: Jeff Kodysz <jeffk813@...>
To: MTMA <MTMA@groups.io>
Sent: Wed, Nov 22, 2017 11:33 am
Subject: Re: [MTMA] Beginner Level 1 certification

I second what Wolf said about a sim. OpenRocket is free. I personally use Rocksim but that's because I run Mac computers and OpenRocket is Java-based and is not always Mac-friendly. you can't beat the price though! I'm also embarking on a quest to reach Level 1. I just have to get off my caboose and do it! :) I think the hardest part is finding a local field that actually has launches.

Jeff

On Wed, Nov 22, 2017 at 11:25 AM, Wolfram v.Kiparski <astronwolf@...> wrote:
If you haven't already, start using a rocket design/simulator program.  I recommend OpenRocket.  Many people love RockSim.  I am very critical of RockSim.  Both have their strengths and weaknesses. 

You need to get comfortable with being able to accurately determine the Center of Gravity and Center of Pressure of your rocket. 

As for doing a Level 1 cert build that's pretty easy.  Buy kit.  Build kit.  Fly kit.  I scratch built an upscaled Big Bertha using a 3-inch mailing tube, plywood rings and fins I cut myself, and a nose cone I made out of fiberglass and epoxy.  Flew it with a mid-H motor.  Uneventful, nominal flight.  Flying an H motor is no big deal. 


locked Re: Beginner Level 1 certification

Jim Seibyl
 

Essential if you are thinking about a cert, fairly easy to determine using open rocket or rocksim.

I’ll be happy to assist with any questions, and would be happy to sign off on the flight when the time comes.

Best advice to keep it simple, just get it up and back, build for strength, if you are not comfortable with electronics, hold off.  You can use a 4 inch diameter design and keep it under 1500 feet without even a chute release.

“We need more boom.”

On Nov 22, 2017, at 2:04 PM, taugy via Groups.Io <taugy@...> wrote:

Thanks guys, we'll chat more hopefully December 2. Have a great THANKSGIVING!


-----Original Message-----
From: Jeff Kodysz <jeffk813@...>
To: MTMA <MTMA@groups.io>
Sent: Wed, Nov 22, 2017 11:33 am
Subject: Re: [MTMA] Beginner Level 1 certification

I second what Wolf said about a sim. OpenRocket is free. I personally use Rocksim but that's because I run Mac computers and OpenRocket is Java-based and is not always Mac-friendly. you can't beat the price though! I'm also embarking on a quest to reach Level 1. I just have to get off my caboose and do it! :) I think the hardest part is finding a local field that actually has launches.

Jeff

On Wed, Nov 22, 2017 at 11:25 AM, Wolfram v.Kiparski <astronwolf@...> wrote:
If you haven't already, start using a rocket design/simulator program.  I recommend OpenRocket.  Many people love RockSim.  I am very critical of RockSim.  Both have their strengths and weaknesses. 

You need to get comfortable with being able to accurately determine the Center of Gravity and Center of Pressure of your rocket. 

As for doing a Level 1 cert build that's pretty easy.  Buy kit.  Build kit.  Fly kit.  I scratch built an upscaled Big Bertha using a 3-inch mailing tube, plywood rings and fins I cut myself, and a nose cone I made out of fiberglass and epoxy.  Flew it with a mid-H motor.  Uneventful, nominal flight.  Flying an H motor is no big deal. 


locked Re: Beginner Level 1 certification

Tom Augustyn
 

Thanks guys, we'll chat more hopefully December 2. Have a great THANKSGIVING!


-----Original Message-----
From: Jeff Kodysz <jeffk813@...>
To: MTMA <MTMA@groups.io>
Sent: Wed, Nov 22, 2017 11:33 am
Subject: Re: [MTMA] Beginner Level 1 certification

I second what Wolf said about a sim. OpenRocket is free. I personally use Rocksim but that's because I run Mac computers and OpenRocket is Java-based and is not always Mac-friendly. you can't beat the price though! I'm also embarking on a quest to reach Level 1. I just have to get off my caboose and do it! :) I think the hardest part is finding a local field that actually has launches.

Jeff

On Wed, Nov 22, 2017 at 11:25 AM, Wolfram v.Kiparski <astronwolf@...> wrote:
If you haven't already, start using a rocket design/simulator program.  I recommend OpenRocket.  Many people love RockSim.  I am very critical of RockSim.  Both have their strengths and weaknesses. 

You need to get comfortable with being able to accurately determine the Center of Gravity and Center of Pressure of your rocket. 

As for doing a Level 1 cert build that's pretty easy.  Buy kit.  Build kit.  Fly kit.  I scratch built an upscaled Big Bertha using a 3-inch mailing tube, plywood rings and fins I cut myself, and a nose cone I made out of fiberglass and epoxy.  Flew it with a mid-H motor.  Uneventful, nominal flight.  Flying an H motor is no big deal. 


locked Re: Beginner Level 1 certification

Tom Augustyn
 

I couldn't think of it previously and I'm glad you mentioned it. My concern is and will need help with what you said below:

"accurately determine the Center of Gravity and Center of Pressure of your rocket.  "


-----Original Message-----
From: Wolfram v.Kiparski <astronwolf@...>
To: MTMA <MTMA@groups.io>
Sent: Wed, Nov 22, 2017 11:26 am
Subject: Re: [MTMA] Beginner Level 1 certification

If you haven't already, start using a rocket design/simulator program.  I recommend OpenRocket.  Many people love RockSim.  I am very critical of RockSim.  Both have their strengths and weaknesses. 

You need to get comfortable with being able to accurately determine the Center of Gravity and Center of Pressure of your rocket. 

As for doing a Level 1 cert build that's pretty easy.  Buy kit.  Build kit.  Fly kit.  I scratch built an upscaled Big Bertha using a 3-inch mailing tube, plywood rings and fins I cut myself, and a nose cone I made out of fiberglass and epoxy.  Flew it with a mid-H motor.  Uneventful, nominal flight.  Flying an H motor is no big deal. 


locked MTMA Model Rocket Launch, Sat, 11/25/17 12:00pm-4:00pm #cal-reminder

MTMA@groups.io Calendar <MTMA@...>
 

Reminder:
MTMA Model Rocket Launch

When:
Saturday, 25 November 2017
12:00pm to 4:00pm
(GMT-05:00) America/New York

Where:
Ray Harmon Flying Field, 619 Bartlett Road, Aurora, OH

Description:
This is a regular model rocket launch to be conducted in accordance with the NAR Model Rocket Safety Code. In the event of poor flying conditions, the following Sunday will be the backup flying date. Stay tuned for last minute updates.

View Event.


locked Re: Beginner Level 1 certification

Jeff Kodysz
 

I second what Wolf said about a sim. OpenRocket is free. I personally use Rocksim but that's because I run Mac computers and OpenRocket is Java-based and is not always Mac-friendly. you can't beat the price though! I'm also embarking on a quest to reach Level 1. I just have to get off my caboose and do it! :) I think the hardest part is finding a local field that actually has launches.

Jeff

On Wed, Nov 22, 2017 at 11:25 AM, Wolfram v.Kiparski <astronwolf@...> wrote:
If you haven't already, start using a rocket design/simulator program.  I recommend OpenRocket.  Many people love RockSim.  I am very critical of RockSim.  Both have their strengths and weaknesses. 

You need to get comfortable with being able to accurately determine the Center of Gravity and Center of Pressure of your rocket. 

As for doing a Level 1 cert build that's pretty easy.  Buy kit.  Build kit.  Fly kit.  I scratch built an upscaled Big Bertha using a 3-inch mailing tube, plywood rings and fins I cut myself, and a nose cone I made out of fiberglass and epoxy.  Flew it with a mid-H motor.  Uneventful, nominal flight.  Flying an H motor is no big deal. 



locked Re: Beginner Level 1 certification

Wolfram v.Kiparski
 

If you haven't already, start using a rocket design/simulator program.  I recommend OpenRocket.  Many people love RockSim.  I am very critical of RockSim.  Both have their strengths and weaknesses. 

You need to get comfortable with being able to accurately determine the Center of Gravity and Center of Pressure of your rocket. 

As for doing a Level 1 cert build that's pretty easy.  Buy kit.  Build kit.  Fly kit.  I scratch built an upscaled Big Bertha using a 3-inch mailing tube, plywood rings and fins I cut myself, and a nose cone I made out of fiberglass and epoxy.  Flew it with a mid-H motor.  Uneventful, nominal flight.  Flying an H motor is no big deal. 


locked Beginner Level 1 certification

Tom Augustyn
 

I think I will Wolf just to check out the facility and tools! Hey, who in the group can tutor me on a Level 1 Cert build? Mainly balancing and stability of the build?


locked Re: CWRU think[box] makerspace December 2, 2017

Wolfram v.Kiparski
 

Yes.  Meet there around noon, or whenever we decide as the date approaches.


On Nov 22, 2017 10:22 AM, "taugy via Groups.Io" <taugy@...> wrote:
That sounds cool! So, you guys are going Saturday December 2?


locked Re: Group.io question

Wolfram v.Kiparski
 

Yes.  That was the reason.  Consider also that Yahoo was bought by Verizon, merged with AOL.... Yahoo faces an uncertain future. 

On Nov 22, 2017 10:11 AM, John Ulizzi <jaulizzi@...> wrote:
Hey Guys,

Please refresh my memory on why we changed over from YAhoogroups to Group.io

Another list I am on has been on Yahoogroups fro years, but it is starting to have technical problems. I was wondering if that was our reason for switching, and if so if I should recommend the same to my other group…

Thanks,

John U


On Nov 21, 2017, at 10:34 AM, Jeff Kodysz <jeffk813@...> wrote:

Thanks, John for generously offering to host this year's Christmas party!

Jeff

On Tue, Nov 21, 2017 at 10:14 AM, John Ulizzi <jaulizzi@...> wrote:
 Hi All,

Time to nail down the Christmas Party. It needs to be Saturday 12/9. Sorry to those that wanted it on the 16th, I had to pull that off the table for personal reasons.

So:

Sat, Dec 9, 2017

4:00 pm — ???


Pot Luck, I’ll ask everyone to bring a dish to share, please coordinate with me when you RSVP.

I will provide Pasta, Soft Drinks, and wine. Mark, Beer please, just as last year ?

We will also have a white elephant gift exchange, so keep that in mind when reviewing your build piles !

If this turns into a late night build session so much the better, BYOB to share for that. I have plenty, just always interested in trying new stuff…

Mark, would you please post this to the FB page as well.

Hope to see you all here !

Happy Thanksgiving,

John


On Nov 17, 2017, at 12:00 PM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Model Rocket Launch

When:
Saturday, 25 November 2017
12:00pm to 4:00pm
(GMT-05:00) America/New York

Where:
Ray Harmon Flying Field, 619 Bartlett Road, Aurora, OH

Description:
This is a regular model rocket launch to be conducted in accordance with the NAR Model Rocket Safety Code. In the event of poor flying conditions, the following Sunday will be the backup flying date. Stay tuned for last minute updates.

View Event.








locked Re: CWRU think[box] makerspace December 2, 2017

Tom Augustyn
 

That sounds cool! So, you guys are going Saturday December 2?


locked Group.io question

John Ulizzi
 

Hey Guys,

Please refresh my memory on why we changed over from YAhoogroups to Group.io

Another list I am on has been on Yahoogroups fro years, but it is starting to have technical problems. I was wondering if that was our reason for switching, and if so if I should recommend the same to my other group…

Thanks,

John U


On Nov 21, 2017, at 10:34 AM, Jeff Kodysz <jeffk813@...> wrote:

Thanks, John for generously offering to host this year's Christmas party!

Jeff

On Tue, Nov 21, 2017 at 10:14 AM, John Ulizzi <jaulizzi@...> wrote:
 Hi All,

Time to nail down the Christmas Party. It needs to be Saturday 12/9. Sorry to those that wanted it on the 16th, I had to pull that off the table for personal reasons.

So:

Sat, Dec 9, 2017

4:00 pm — ???


Pot Luck, I’ll ask everyone to bring a dish to share, please coordinate with me when you RSVP.

I will provide Pasta, Soft Drinks, and wine. Mark, Beer please, just as last year ?

We will also have a white elephant gift exchange, so keep that in mind when reviewing your build piles !

If this turns into a late night build session so much the better, BYOB to share for that. I have plenty, just always interested in trying new stuff…

Mark, would you please post this to the FB page as well.

Hope to see you all here !

Happy Thanksgiving,

John


On Nov 17, 2017, at 12:00 PM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Model Rocket Launch

When:
Saturday, 25 November 2017
12:00pm to 4:00pm
(GMT-05:00) America/New York

Where:
Ray Harmon Flying Field, 619 Bartlett Road, Aurora, OH

Description:
This is a regular model rocket launch to be conducted in accordance with the NAR Model Rocket Safety Code. In the event of poor flying conditions, the following Sunday will be the backup flying date. Stay tuned for last minute updates.

View Event.







locked CWRU think[box] makerspace December 2, 2017

Wolfram v.Kiparski
 

Mike Nowak and I plan on spending some time at the think[box] on Saturday, December 2.  We will be using the laser cutters to cut a few model rocket parts for our own projects.  The laser cutters are ideal for cutting things like fins and centering rings.

We have held club build sessions here in the past and can do so again in the future.  Anyone is welcome to join us. 


locked Re: Christmas Party

Jeff Kodysz
 

Thanks, John for generously offering to host this year's Christmas party!

Jeff

On Tue, Nov 21, 2017 at 10:14 AM, John Ulizzi <jaulizzi@...> wrote:
 Hi All,

Time to nail down the Christmas Party. It needs to be Saturday 12/9. Sorry to those that wanted it on the 16th, I had to pull that off the table for personal reasons.

So:

Sat, Dec 9, 2017

4:00 pm — ???


Pot Luck, I’ll ask everyone to bring a dish to share, please coordinate with me when you RSVP.

I will provide Pasta, Soft Drinks, and wine. Mark, Beer please, just as last year ?

We will also have a white elephant gift exchange, so keep that in mind when reviewing your build piles !

If this turns into a late night build session so much the better, BYOB to share for that. I have plenty, just always interested in trying new stuff…

Mark, would you please post this to the FB page as well.

Hope to see you all here !

Happy Thanksgiving,

John


On Nov 17, 2017, at 12:00 PM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Model Rocket Launch

When:
Saturday, 25 November 2017
12:00pm to 4:00pm
(GMT-05:00) America/New York

Where:
Ray Harmon Flying Field, 619 Bartlett Road, Aurora, OH

Description:
This is a regular model rocket launch to be conducted in accordance with the NAR Model Rocket Safety Code. In the event of poor flying conditions, the following Sunday will be the backup flying date. Stay tuned for last minute updates.

View Event.




locked Christmas Party

John Ulizzi
 

 Hi All,

Time to nail down the Christmas Party. It needs to be Saturday 12/9. Sorry to those that wanted it on the 16th, I had to pull that off the table for personal reasons.

So:

Sat, Dec 9, 2017

4:00 pm — ???

4757 Glastonbury Circle
Richmond Hts, Ohio , 44143

Pot Luck, I’ll ask everyone to bring a dish to share, please coordinate with me when you RSVP.

I will provide Pasta, Soft Drinks, and wine. Mark, Beer please, just as last year ?

We will also have a white elephant gift exchange, so keep that in mind when reviewing your build piles !

If this turns into a late night build session so much the better, BYOB to share for that. I have plenty, just always interested in trying new stuff…

Mark, would you please post this to the FB page as well.

Hope to see you all here !

Happy Thanksgiving,

John


On Nov 17, 2017, at 12:00 PM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Model Rocket Launch

When:
Saturday, 25 November 2017
12:00pm to 4:00pm
(GMT-05:00) America/New York

Where:
Ray Harmon Flying Field, 619 Bartlett Road, Aurora, OH

Description:
This is a regular model rocket launch to be conducted in accordance with the NAR Model Rocket Safety Code. In the event of poor flying conditions, the following Sunday will be the backup flying date. Stay tuned for last minute updates.

View Event.



locked MTMA Model Rocket Launch, Sat, 11/25/17 12:00pm-4:00pm #cal-reminder

MTMA@groups.io Calendar <MTMA@...>
 

Reminder:
MTMA Model Rocket Launch

When:
Saturday, 25 November 2017
12:00pm to 4:00pm
(GMT-05:00) America/New York

Where:
Ray Harmon Flying Field, 619 Bartlett Road, Aurora, OH

Description:
This is a regular model rocket launch to be conducted in accordance with the NAR Model Rocket Safety Code. In the event of poor flying conditions, the following Sunday will be the backup flying date. Stay tuned for last minute updates.

View Event.


locked Re: MTMA Holiday Party #poll

larry ward <kbike85@...>
 

UGh I don't remember that conversation my bad but looking to put a face to the posts :)


Sent from Outlook




From: MTMA@groups.io <MTMA@groups.io> on behalf of John Ulizzi <jaulizzi@...>
Sent: Wednesday, November 15, 2017 3:26 PM
To: MTMA@groups.io
Subject: Re: [MTMA] MTMA Holiday Party #poll
 
 Hi Larry, 

I have several but we have never ridden together. I have only met you at the social functions. But I am the guy that came up to you at the last MSTA dinner and asked you about the rocket stuff you were getting rid of…

:-)

John


On Nov 13, 2017, at 3:53 PM, larry ward <kbike85@...> wrote:

Well Well MSTA you say

I am tryiong to place you..usually I associate faces with bikes what do u have?

Sent from Outlook



From: MTMA@groups.io <MTMA@groups.io> on behalf of John Ulizzi <jaulizzi@...>
Sent: Monday, November 13, 2017 5:32 PM
To: MTMA@groups.io
Subject: Re: [MTMA] MTMA Holiday Party #poll
 
HAHA ! 

That went right over your head Larry !  I was referring to the NEO MSTA Christmas Party as the second one… Yes, I know that hasn’t been scheduled yet, but it will be shortly…

John


On Nov 13, 2017, at 6:56 AM, larry ward <kbike85@...> wrote:

Mark said picks the dates that are most favorable so I chose two. Yes lets have at least two Christmas parties :)

Sent from Outlook



From: MTMA@groups.io <MTMA@groups.io> on behalf of John Ulizzi <jaulizzi@...>
Sent: Monday, November 13, 2017 4:37 AM
To: MTMA@groups.io
Subject: Re: [MTMA] MTMA Holiday Party #poll
 
Oh Geez Larry,

Am I going to have to see you at two Christmas parties this year ?

Just kidding, love to see you at both...

:-)

John

Sent from my iPhone

On Nov 12, 2017, at 7:18 AM, larry ward <kbike85@...> wrote:

9th and 16th

Sent from Outlook



From: MTMA@groups.io <MTMA@groups.io> on behalf of Mark Recktenwald via Groups.Io <markrecktenwald@...>
Sent: Sunday, November 12, 2017 2:47 AM
To: MTMA@groups.io
Subject: [MTMA] MTMA Holiday Party #poll
 
A new poll has been created:
We would like to pick a date for the Holiday Party. John Ulizzi has graciously offered to host it again this year. The party will be on a Saturday afternoon/evening.

Please indicate which of the following dates are OK for you (you may select one, two, or all three):
1. Saturday, November 25, 2017
2. Saturday, December 9, 2017
3. Saturday, December 16, 2017



locked Re: MTMA Holiday Party #poll

Tom Augustyn
 

One question. This is Tom Augustyn. I've attended only two club launches being new to the group last September. I paid the $20 full launch privileges fee beck in September. I will have to pay the $20 again in January for 2018 fees correct ?


-----Original Message-----
From: John Ulizzi <jaulizzi@...>
To: MTMA <MTMA@groups.io>
Sent: Wed, Nov 15, 2017 10:26 am
Subject: Re: [MTMA] MTMA Holiday Party #poll

 Hi Larry, 

I have several but we have never ridden together. I have only met you at the social functions. But I am the guy that came up to you at the last MSTA dinner and asked you about the rocket stuff you were getting rid of…

:-)

John


On Nov 13, 2017, at 3:53 PM, larry ward <kbike85@...> wrote:

Well Well MSTA you say

I am tryiong to place you..usually I associate faces with bikes what do u have?

Sent from Outlook



From: MTMA@groups.io <MTMA@groups.io> on behalf of John Ulizzi <jaulizzi@...>
Sent: Monday, November 13, 2017 5:32 PM
To: MTMA@groups.io
Subject: Re: [MTMA] MTMA Holiday Party #poll
 
HAHA ! 

That went right over your head Larry !  I was referring to the NEO MSTA Christmas Party as the second one… Yes, I know that hasn’t been scheduled yet, but it will be shortly…

John


On Nov 13, 2017, at 6:56 AM, larry ward <kbike85@...> wrote:

Mark said picks the dates that are most favorable so I chose two. Yes lets have at least two Christmas parties :)

Sent from Outlook



From: MTMA@groups.io <MTMA@groups.io> on behalf of John Ulizzi <jaulizzi@...>
Sent: Monday, November 13, 2017 4:37 AM
To: MTMA@groups.io
Subject: Re: [MTMA] MTMA Holiday Party #poll
 
Oh Geez Larry,

Am I going to have to see you at two Christmas parties this year ?

Just kidding, love to see you at both...

:-)

John

Sent from my iPhone

On Nov 12, 2017, at 7:18 AM, larry ward <kbike85@...> wrote:

9th and 16th

Sent from Outlook



From: MTMA@groups.io <MTMA@groups.io> on behalf of Mark Recktenwald via Groups.Io <markrecktenwald@...>
Sent: Sunday, November 12, 2017 2:47 AM
To: MTMA@groups.io
Subject: [MTMA] MTMA Holiday Party #poll
 
A new poll has been created:
We would like to pick a date for the Holiday Party. John Ulizzi has graciously offered to host it again this year. The party will be on a Saturday afternoon/evening.

Please indicate which of the following dates are OK for you (you may select one, two, or all three):
1. Saturday, November 25, 2017
2. Saturday, December 9, 2017
3. Saturday, December 16, 2017