Date   

locked Star Wars Party Friday Night !

John Ulizzi
 

Hey Guys,

I completely forgot to mention this at the party, but would anyone be interested in getting together as a group to see The Last Jedi on Friday?

The Cinemark at Macedonia Commons ( near the Hobby Lobby) has a pretty good theatre, as does Solon Commons.

What could be better than getting together with a bunch of your nerd friends to see the new Star Wars movie?

I’m thinking Friday at either location around 6 or 7…

We could even get together for dinner beforehand. Winking Lizard is right there….

Any interest?

John


locked This Weekend's Launch is Canceled #nogo

Mark Recktenwald
 

Due to forecast cold, wind, and snow, this weekend's launch is canceled; but the Holiday Party is stil GO!

-- 
Mark Recktenwald
MTMA Treasurer


locked Re: MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

Pat Easter
 

Sorry John,

Won’t be up to it this weekend.

Pat Easter
Skybusters Section Advisor
Skybusters Outreach and Education
www.skybusters.org

------- Original Message -------
From : John Ulizzi[mailto:jaulizzi@...]
Sent : 12/6/2017 7:22:05 PM
To : MTMA@groups.io
Cc :
Subject : RE: Re: [MTMA] MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

Hey Guys
I need a head count and also need to organize the Potluck. I have received very few hard RSVPs from you. Please RSVP with the number in your party, and the dish you wish to
bring. Beer, wine, and soft drinks are covered. I am making pasta with home made sauce. I need at least one side dish, a salad, and a desert or two.
Also, I’m not sure why the notice says so, but this party does not end at 8:00. At least not at 8 on Saturday night. If anyone is still there at 8 on Sunday morning, you stand a 50/50
chance of getting breakfast or being kicked out !!!
Seriously, I hope to see all of you !
Also, dont forget to raid your build pile for a white elephant gift !
See you then,
John

Sent from my iPhone
On Dec 6, 2017, at 4:00 PM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:

MTMA Holiday Party

When:


Saturday, 9 December 2017

4:00pm to 8:00pm


(GMT-05:00) America/New York




Where:

4757 Glastonbury Cir, Richmond Heights, OH 44143



Description:

Please RSVP via email to John Ulizzi: jaulizzi@...

Pot Luck, everyone please bring a dish to share. Please coordinate with John when you email him to RSVP.

John will provide Pasta, Soft Drinks, and Wine. Mark will provide Beer (Oktoberfest/Märzen on tap).

We will also have a white elephant gift exchange, so please dig deep into your build pile!

If this turns into a late night build session, so much the better! BYOB to share for that. John has plenty, but is always interested in trying new stuff.



View Event.


locked Re: MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

Jim Seibyl
 

The TMO launches was scrubbed for this Saturday, I will try to stop by for a bit just me

Gheem

“We need more boom.”

On Dec 6, 2017, at 8:44 PM, Jeff Kodysz <jeffk813@...> wrote:

Hey John, 

I know that you already know Beth and I are coming. We will be bringing a dessert. Sorry, not Cthulhu pie though. Lol

Jeff

On Dec 6, 2017, at 8:10 PM, larry ward <kbike85@...> wrote:

Unfortunately my employers party is at 6pm that evening as well. Sry will have to miss it this year.


Sent from Outlook




From: MTMA@groups.io <MTMA@groups.io> on behalf of John Ulizzi <jaulizzi@...>
Sent: Thursday, December 7, 2017 12:22 AM
To: MTMA@groups.io
Subject: Re: [MTMA] MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder
 
Hey Guys

I need a head count and also need to organize the Potluck. I have received very few hard RSVPs from you. Please RSVP with the number in your party, and the dish you wish to bring. Beer, wine, and soft drinks are covered. I am making pasta with home made sauce. I need at least one side dish, a salad, and a desert or two. 

Also, I’m not sure why the notice says so, but this party does not end at 8:00. At least not at 8 on Saturday night. If anyone is still there at 8 on Sunday morning, you stand a 50/50 chance of getting breakfast or being kicked out !!!

Seriously, I hope to see all of you !

Also, dont forget to raid your build pile for a white elephant gift !

See you then,

John

Sent from my iPhone

On Dec 6, 2017, at 4:00 PM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Holiday Party

When:
Saturday, 9 December 2017
4:00pm to 8:00pm
(GMT-05:00) America/New York

Where:
4757 Glastonbury Cir, Richmond Heights, OH 44143

Description:
Please RSVP via email to John Ulizzi: jaulizzi@...

Pot Luck, everyone please bring a dish to share. Please coordinate with John when you email him to RSVP.

John will provide Pasta, Soft Drinks, and Wine. Mark will provide Beer (Oktoberfest/Märzen on tap).

We will also have a white elephant gift exchange, so please dig deep into your build pile!

If this turns into a late night build session, so much the better! BYOB to share for that. John has plenty, but is always interested in trying new stuff.

View Event.


locked Re: MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

Jeff Kodysz
 

Hey John, 

I know that you already know Beth and I are coming. We will be bringing a dessert. Sorry, not Cthulhu pie though. Lol

Jeff

On Dec 6, 2017, at 8:10 PM, larry ward <kbike85@...> wrote:

Unfortunately my employers party is at 6pm that evening as well. Sry will have to miss it this year.


Sent from Outlook




From: MTMA@groups.io <MTMA@groups.io> on behalf of John Ulizzi <jaulizzi@...>
Sent: Thursday, December 7, 2017 12:22 AM
To: MTMA@groups.io
Subject: Re: [MTMA] MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder
 
Hey Guys

I need a head count and also need to organize the Potluck. I have received very few hard RSVPs from you. Please RSVP with the number in your party, and the dish you wish to bring. Beer, wine, and soft drinks are covered. I am making pasta with home made sauce. I need at least one side dish, a salad, and a desert or two. 

Also, I’m not sure why the notice says so, but this party does not end at 8:00. At least not at 8 on Saturday night. If anyone is still there at 8 on Sunday morning, you stand a 50/50 chance of getting breakfast or being kicked out !!!

Seriously, I hope to see all of you !

Also, dont forget to raid your build pile for a white elephant gift !

See you then,

John

Sent from my iPhone

On Dec 6, 2017, at 4:00 PM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Holiday Party

When:
Saturday, 9 December 2017
4:00pm to 8:00pm
(GMT-05:00) America/New York

Where:
4757 Glastonbury Cir, Richmond Heights, OH 44143

Description:
Please RSVP via email to John Ulizzi: jaulizzi@...

Pot Luck, everyone please bring a dish to share. Please coordinate with John when you email him to RSVP.

John will provide Pasta, Soft Drinks, and Wine. Mark will provide Beer (Oktoberfest/Märzen on tap).

We will also have a white elephant gift exchange, so please dig deep into your build pile!

If this turns into a late night build session, so much the better! BYOB to share for that. John has plenty, but is always interested in trying new stuff.

View Event.


locked Re: MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

larry ward <kbike85@...>
 

Unfortunately my employers party is at 6pm that evening as well. Sry will have to miss it this year.


Sent from Outlook




From: MTMA@groups.io <MTMA@groups.io> on behalf of John Ulizzi <jaulizzi@...>
Sent: Thursday, December 7, 2017 12:22 AM
To: MTMA@groups.io
Subject: Re: [MTMA] MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder
 
Hey Guys

I need a head count and also need to organize the Potluck. I have received very few hard RSVPs from you. Please RSVP with the number in your party, and the dish you wish to bring. Beer, wine, and soft drinks are covered. I am making pasta with home made sauce. I need at least one side dish, a salad, and a desert or two. 

Also, I’m not sure why the notice says so, but this party does not end at 8:00. At least not at 8 on Saturday night. If anyone is still there at 8 on Sunday morning, you stand a 50/50 chance of getting breakfast or being kicked out !!!

Seriously, I hope to see all of you !

Also, dont forget to raid your build pile for a white elephant gift !

See you then,

John

Sent from my iPhone

On Dec 6, 2017, at 4:00 PM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Holiday Party

When:
Saturday, 9 December 2017
4:00pm to 8:00pm
(GMT-05:00) America/New York

Where:
4757 Glastonbury Cir, Richmond Heights, OH 44143

Description:
Please RSVP via email to John Ulizzi: jaulizzi@...

Pot Luck, everyone please bring a dish to share. Please coordinate with John when you email him to RSVP.

John will provide Pasta, Soft Drinks, and Wine. Mark will provide Beer (Oktoberfest/Märzen on tap).

We will also have a white elephant gift exchange, so please dig deep into your build pile!

If this turns into a late night build session, so much the better! BYOB to share for that. John has plenty, but is always interested in trying new stuff.

View Event.


locked Re: MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

John Ulizzi
 

Hey Guys

I need a head count and also need to organize the Potluck. I have received very few hard RSVPs from you. Please RSVP with the number in your party, and the dish you wish to bring. Beer, wine, and soft drinks are covered. I am making pasta with home made sauce. I need at least one side dish, a salad, and a desert or two. 

Also, I’m not sure why the notice says so, but this party does not end at 8:00. At least not at 8 on Saturday night. If anyone is still there at 8 on Sunday morning, you stand a 50/50 chance of getting breakfast or being kicked out !!!

Seriously, I hope to see all of you !

Also, dont forget to raid your build pile for a white elephant gift !

See you then,

John

Sent from my iPhone

On Dec 6, 2017, at 4:00 PM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Holiday Party

When:
Saturday, 9 December 2017
4:00pm to 8:00pm
(GMT-05:00) America/New York

Where:
4757 Glastonbury Cir, Richmond Heights, OH 44143

Description:
Please RSVP via email to John Ulizzi: jaulizzi@...

Pot Luck, everyone please bring a dish to share. Please coordinate with John when you email him to RSVP.

John will provide Pasta, Soft Drinks, and Wine. Mark will provide Beer (Oktoberfest/Märzen on tap).

We will also have a white elephant gift exchange, so please dig deep into your build pile!

If this turns into a late night build session, so much the better! BYOB to share for that. John has plenty, but is always interested in trying new stuff.

View Event.


locked MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

MTMA@groups.io Calendar <MTMA@...>
 

Reminder:
MTMA Holiday Party

When:
Saturday, 9 December 2017
4:00pm to 8:00pm
(GMT-05:00) America/New York

Where:
4757 Glastonbury Cir, Richmond Heights, OH 44143

Description:
Please RSVP via email to John Ulizzi: jaulizzi@...

Pot Luck, everyone please bring a dish to share. Please coordinate with John when you email him to RSVP.

John will provide Pasta, Soft Drinks, and Wine. Mark will provide Beer (Oktoberfest/Märzen on tap).

We will also have a white elephant gift exchange, so please dig deep into your build pile!

If this turns into a late night build session, so much the better! BYOB to share for that. John has plenty, but is always interested in trying new stuff.

View Event.


locked Re: MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

Louis Janelle
 

I am unable to attend Saturday's party.  Thank you for all of your efforts.

Lou Janelle


642 Hunters Trail
Akron, OH 44313-8153
330-319-3324
 
 
 


-------- Original Message --------
Subject: [MTMA] MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm
#cal-reminder
From: "MTMA@groups.io Calendar" <MTMA@groups.io>
Date: Fri, December 01, 2017 4:00 pm
To: MTMA@groups.io

Reminder:
MTMA Holiday Party
When:
Saturday, 9 December 2017
4:00pm to 8:00pm
(GMT-05:00) America/New York
Where:
4757 Glastonbury Cir, Richmond Heights, OH 44143
Description:
Please RSVP via email to John Ulizzi: jaulizzi@...

Pot Luck, everyone please bring a dish to share. Please coordinate with John when you email him to RSVP.

John will provide Pasta, Soft Drinks, and Wine. Mark will provide Beer (Oktoberfest/Märzen on tap).

We will also have a white elephant gift exchange, so please dig deep into your build pile!

If this turns into a late night build session, so much the better! BYOB to share for that. John has plenty, but is always interested in trying new stuff.


locked Re: MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

John Berkey
 

I hope to make it. Won't know for sure until later in the week, have a lot going on this weekend. If I can make it can I bring some kind of desert?            Pie, cookies, brownies????  All of the above!
 
John Berkey
 
 
 
 
 
 

In a message dated 12/1/2017 6:33:10 P.M. Eastern Standard Time, notra@... writes:
Vicki and I will be there.  What should we bring?

Chris

-----Original Message-----
From: "MTMA@groups.io Calendar" <mtma@groups.io>
Sent: Dec 1, 2017 4:00 PM
To: MTMA@groups.io
Subject: [MTMA] MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

Reminder:
MTMA Holiday Party

When:
Saturday, 9 December 2017
4:00pm to 8:00pm
(GMT-05:00) America/New York

Where:
4757 Glastonbury Cir, Richmond Heights, OH 44143

Description:
Please RSVP via email to John Ulizzi: jaulizzi@...

Pot Luck, everyone please bring a dish to share. Please coordinate with John when you email him to RSVP.

John will provide Pasta, Soft Drinks, and Wine. Mark will provide Beer (Oktoberfest/Märzen on tap).

We will also have a white elephant gift exchange, so please dig deep into your build pile!

If this turns into a late night build session, so much the better! BYOB to share for that. John has plenty, but is always interested in trying new stuff.

View Event.

</mtma@groups.io>


locked Re: CWRU think[box] makerspace December 2, 2017

Jeff Kodysz
 

Thanks for the correction, Pat. I apologize for the mixup. Either way, looking forward to attending!

Jeff

On Sat, Dec 2, 2017 at 4:16 PM, Pat Easter <thumper@...> wrote:
Jeff,

Just a quick note to let you all know, tomorrow’s launch is being conducted by SKYBUSTERS under NAR safety rules.
Commercial motors only.

Pat Easter
Skybusters Section Advisor
Skybusters Outreach and Education
www.skybusters.org


------- Original Message -------
From    : Jeff Kodysz[mailto:jeffk813@gmail.com]
Sent    : 12/2/2017 9:41:11 AM
To      : MTMA@groups.io
Cc      :
Subject : RE: Re: [MTMA] CWRU think[box] makerspace December 2, 2017

 I was looking forward to meeting up with everyone and checking out the makerspace today, but unfortunately something has come up and I won't be able to make it. I'm still looking
forward to it next time we go up there in the new year. I've got projects backing up in my head. :) I'm still hoping to make it to the NOTRA launch tomorrow in Amherst so if anyone is
going, we may see you there, and if not, next weekend is coming up as well, with the final MTMA launch of 2017 and the Holiday Party.
Jeff 
On Fri, Dec 1, 2017 at 3:25 PM, taugy via Groups.Io <taugy=aol.com@groups.io> wrote:
I can wait until February. Maybe by that time I'll have my Precision LOC IV started and ready to figure CG/CP .


-----Original Message-----
From: Wolfram v.Kiparski <astronwolf@...>
To: MTMA <MTMA@groups.io>
Sent: Fri, Dec 1, 2017 3:06 pm
Subject: Re: [MTMA] CWRU think[box] makerspace December 2, 2017



One can review the CWRU think[box] schedule here.

They're getting ready to close for the between-semesters break.  They'll only reopen at the end of January.  I can see myself going back in February, though I will not commit to a
schedule right now.
-W





















locked Re: CWRU think[box] makerspace December 2, 2017

Pat Easter
 

Jeff,

Just a quick note to let you all know, tomorrow’s launch is being conducted by SKYBUSTERS under NAR safety rules.
Commercial motors only.

Pat Easter
Skybusters Section Advisor
Skybusters Outreach and Education
www.skybusters.org

------- Original Message -------
From : Jeff Kodysz[mailto:@JeffK813]
Sent : 12/2/2017 9:41:11 AM
To : MTMA@groups.io
Cc :
Subject : RE: Re: [MTMA] CWRU think[box] makerspace December 2, 2017

I was looking forward to meeting up with everyone and checking out the makerspace today, but unfortunately something has come up and I won't be able to make it. I'm still looking
forward to it next time we go up there in the new year. I've got projects backing up in my head. :) I'm still hoping to make it to the NOTRA launch tomorrow in Amherst so if anyone is
going, we may see you there, and if not, next weekend is coming up as well, with the final MTMA launch of 2017 and the Holiday Party.
Jeff 
On Fri, Dec 1, 2017 at 3:25 PM, taugy via Groups.Io <taugy=aol.com@groups.io> wrote:
I can wait until February. Maybe by that time I'll have my Precision LOC IV started and ready to figure CG/CP .


-----Original Message-----
From: Wolfram v.Kiparski <astronwolf@...>
To: MTMA <MTMA@groups.io>
Sent: Fri, Dec 1, 2017 3:06 pm
Subject: Re: [MTMA] CWRU think[box] makerspace December 2, 2017



One can review the CWRU think[box] schedule here.

They're getting ready to close for the between-semesters break.  They'll only reopen at the end of January.  I can see myself going back in February, though I will not commit to a
schedule right now.
-W


locked Re: CWRU think[box] makerspace December 2, 2017

Jeff Kodysz
 

I was looking forward to meeting up with everyone and checking out the makerspace today, but unfortunately something has come up and I won't be able to make it. I'm still looking forward to it next time we go up there in the new year. I've got projects backing up in my head. :) I'm still hoping to make it to the NOTRA launch tomorrow in Amherst so if anyone is going, we may see you there, and if not, next weekend is coming up as well, with the final MTMA launch of 2017 and the Holiday Party.

Jeff 

On Fri, Dec 1, 2017 at 3:25 PM, taugy via Groups.Io <taugy@...> wrote:
I can wait until February. Maybe by that time I'll have my Precision LOC IV started and ready to figure CG/CP .


-----Original Message-----
From: Wolfram v.Kiparski <astronwolf@...>
To: MTMA <MTMA@groups.io>
Sent: Fri, Dec 1, 2017 3:06 pm
Subject: Re: [MTMA] CWRU think[box] makerspace December 2, 2017

One can review the CWRU think[box] schedule here.

They're getting ready to close for the between-semesters break.  They'll only reopen at the end of January.  I can see myself going back in February, though I will not commit to a schedule right now.
-W



locked Re: MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

Chris Pearson
 

Vicki and I will be there.  What should we bring?

Chris

-----Original Message-----
From: "MTMA@groups.io Calendar"
Sent: Dec 1, 2017 4:00 PM
To: MTMA@groups.io
Subject: [MTMA] MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

Reminder:
MTMA Holiday Party

When:
Saturday, 9 December 2017
4:00pm to 8:00pm
(GMT-05:00) America/New York

Where:
4757 Glastonbury Cir, Richmond Heights, OH 44143

Description:
Please RSVP via email to John Ulizzi: jaulizzi@...

Pot Luck, everyone please bring a dish to share. Please coordinate with John when you email him to RSVP.

John will provide Pasta, Soft Drinks, and Wine. Mark will provide Beer (Oktoberfest/Märzen on tap).

We will also have a white elephant gift exchange, so please dig deep into your build pile!

If this turns into a late night build session, so much the better! BYOB to share for that. John has plenty, but is always interested in trying new stuff.

View Event.


locked Re: MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

Tom Augustyn
 

Sounds fun!! I will have to make sure I make it next year.!!


-----Original Message-----
From: MTMA@groups.io Calendar <MTMA@groups.io>
To: MTMA <MTMA@groups.io>
Sent: Fri, Dec 1, 2017 4:00 pm
Subject: [MTMA] MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

Reminder:
MTMA Holiday Party

When:
Saturday, 9 December 2017
4:00pm to 8:00pm
(GMT-05:00) America/New York

Where:
4757 Glastonbury Cir, Richmond Heights, OH 44143

Description:
Please RSVP via email to John Ulizzi: jaulizzi@...

Pot Luck, everyone please bring a dish to share. Please coordinate with John when you email him to RSVP.

John will provide Pasta, Soft Drinks, and Wine. Mark will provide Beer (Oktoberfest/Märzen on tap).

We will also have a white elephant gift exchange, so please dig deep into your build pile!

If this turns into a late night build session, so much the better! BYOB to share for that. John has plenty, but is always interested in trying new stuff.

View Event.


locked MTMA Holiday Party, Sat, 12/9/17 4:00pm-8:00pm #cal-reminder

MTMA@groups.io Calendar <MTMA@...>
 

Reminder:
MTMA Holiday Party

When:
Saturday, 9 December 2017
4:00pm to 8:00pm
(GMT-05:00) America/New York

Where:
4757 Glastonbury Cir, Richmond Heights, OH 44143

Description:
Please RSVP via email to John Ulizzi: jaulizzi@...

Pot Luck, everyone please bring a dish to share. Please coordinate with John when you email him to RSVP.

John will provide Pasta, Soft Drinks, and Wine. Mark will provide Beer (Oktoberfest/Märzen on tap).

We will also have a white elephant gift exchange, so please dig deep into your build pile!

If this turns into a late night build session, so much the better! BYOB to share for that. John has plenty, but is always interested in trying new stuff.

View Event.


locked Re: CWRU think[box] makerspace December 2, 2017

Tom Augustyn
 

I can wait until February. Maybe by that time I'll have my Precision LOC IV started and ready to figure CG/CP .


-----Original Message-----
From: Wolfram v.Kiparski <astronwolf@...>
To: MTMA <MTMA@groups.io>
Sent: Fri, Dec 1, 2017 3:06 pm
Subject: Re: [MTMA] CWRU think[box] makerspace December 2, 2017

One can review the CWRU think[box] schedule here.

They're getting ready to close for the between-semesters break.  They'll only reopen at the end of January.  I can see myself going back in February, though I will not commit to a schedule right now.
-W


locked Re: CWRU think[box] makerspace December 2, 2017

Wolfram v.Kiparski
 

One can review the CWRU think[box] schedule here.

They're getting ready to close for the between-semesters break.  They'll only reopen at the end of January.  I can see myself going back in February, though I will not commit to a schedule right now.
-W


locked Re: CWRU think[box] makerspace December 2, 2017

Tom Augustyn
 

Wolf,

I will not be able to make it up to the think box tomorrow. I have loaded Open Rocket 15.03 on my device and will work with it. When do you think you and Mike will hit the think box again?

Have a great weekend and have fun at the Christmas party.

Tom


-----Original Message-----
From: Wolfram v.Kiparski <astronwolf@...>
To: MTMA <MTMA@groups.io>
Sent: Thu, Nov 23, 2017 10:44 pm
Subject: Re: [MTMA] CWRU think[box] makerspace December 2, 2017

Mike suggested afternoon, and I suggested noon.  We left it at that.  Our plans are flexible.


On Nov 23, 2017 10:19 PM, "taugy via Groups.Io" <taugy=aol.com@groups.io> wrote:
I'm sorry. Think "box"


-----Original Message-----
From: Wolfram v.Kiparski <astronwolf@...>
To: MTMA <MTMA@groups.io>
Sent: Wed, Nov 22, 2017 8:43 am
Subject: [MTMA] CWRU think[box] makerspace December 2, 2017

Mike Nowak and I plan on spending some time at the think[box] on Saturday, December 2.  We will be using the laser cutters to cut a few model rocket parts for our own projects.  The laser cutters are ideal for cutting things like fins and centering rings.

We have held club build sessions here in the past and can do so again in the future.  Anyone is welcome to join us. 


locked Re: Christmas Party

larry ward <kbike85@...>
 

Jeff Please remove me from the Christmas party list. I have our iHeart Christmas Party at 6pm in Canfield I can't make both and am expected at my employers party :(


Sent from Outlook




From: MTMA@groups.io <MTMA@groups.io> on behalf of Jeff Kodysz <jeffk813@...>
Sent: Tuesday, November 21, 2017 3:34 PM
To: MTMA@groups.io
Subject: Re: [MTMA] Christmas Party
 
Thanks, John for generously offering to host this year's Christmas party!

Jeff

On Tue, Nov 21, 2017 at 10:14 AM, John Ulizzi <jaulizzi@...> wrote:
 Hi All,

Time to nail down the Christmas Party. It needs to be Saturday 12/9. Sorry to those that wanted it on the 16th, I had to pull that off the table for personal reasons.

So:

Sat, Dec 9, 2017

4:00 pm — ???


Pot Luck, I’ll ask everyone to bring a dish to share, please coordinate with me when you RSVP.

I will provide Pasta, Soft Drinks, and wine. Mark, Beer please, just as last year ?

We will also have a white elephant gift exchange, so keep that in mind when reviewing your build piles !

If this turns into a late night build session so much the better, BYOB to share for that. I have plenty, just always interested in trying new stuff…

Mark, would you please post this to the FB page as well.

Hope to see you all here !

Happy Thanksgiving,

John


On Nov 17, 2017, at 12:00 PM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Model Rocket Launch

When:
Saturday, 25 November 2017
12:00pm to 4:00pm
(GMT-05:00) America/New York

Where:
Ray Harmon Flying Field, 619 Bartlett Road, Aurora, OH

Description:
This is a regular model rocket launch to be conducted in accordance with the NAR Model Rocket Safety Code. In the event of poor flying conditions, the following Sunday will be the backup flying date. Stay tuned for last minute updates.

View Event.