Date   

locked Re: Sunday's launch cancelled

Tracy Laux
 

What are the recount procedures ?

Regards, Chad


locked Re: Sunday's launch cancelled

Tod Hilty
 

At 07:53 PM 1/10/01 -0500, you wrote:
Can we vote early and often???
Certainly! Just make sure your chads aren't hanging!

<vbg>

Tod


locked Re: Sunday's launch cancelled

Mike & Karen <mleffler@...>
 

Can we vote early and often???

-----Original Message-----
From: Hilty Information Systems [mailto:blankreg@...]
Sent: Wednesday, January 10, 2001 3:37 PM
To: MTMA@...
Subject: [MTMA] Sunday's launch cancelled


Hi everyone..

The launch scheduled for Sunday, Jan. 14th has been cancelled due to field
conditions. The field is currently heavily drifted, and with warming temps,
will probably turn into soup very soon. Also, the weather for Sunday
doesn't look too great at this point either. Next scheduled launch is
February 11th, at the Pioneer Trail field.

Mark and I are currently setting up the MTMA's first meeting of 2001. The
meeting will be at, or around Janurary 29th. We've always had the meetings
on Mondays in the past, but, due to the fact that we have many more members
this year, I've set up a poll at egroups to find out from everyone what day
of the week would be best. If the day chosen is during the work week, the
meeting would obviously be held in the evening. Weekends tho', anything
goes! Please cast your vote at:

http://www.egroups.com/surveys/MTMA?id=492920

I'll close the poll on Sunday night, and we'll schedule the meeting on the
day that's chosen via the poll. The meeting will be at my house. Some
items for the agenda include electing officers (or electing to leave them
alone), electing a replacement for Randy, setting up a few building sessions
for 2001, establishing the 2001 launch and meeting schedule, and more.

Get those rockets built! Spring can't be too far away!

Tod


The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an e-mail
to:
MTMA-unsubscribe@...


locked Re: New poll for MTMA

Gerry Freed
 

Folks

Sunday's Around or after (Church) Noon or later or so work best for me.

Thanks for asking

Gerry Freed NAR-Lvl-2


From: MTMA@...
Reply-To: MTMA@...
To: MTMA@...
Subject: [MTMA] New poll for MTMA
Date: 10 Jan 2001 19:17:41 -0000


Enter your vote today! Check out the new poll for the MTMA
group:


What day of the week would be best to
hold MTMA meetings on?

o Monday
o Tuesday
o Wednesday
o Thursday
o Friday
o Saturday
o Sunday
o Other (just kidding!)


To vote, please visit the following web page:

http://www.egroups.com/polls/MTMA

Note: Please do not reply to this message. Poll votes are
not collected via email. To vote, you must go to the eGroups
web site listed above.

Thanks!




_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


locked Sunday's launch cancelled

Tod Hilty
 

Hi everyone..

The launch scheduled for Sunday, Jan. 14th has been cancelled due to field
conditions. The field is currently heavily drifted, and with warming temps,
will probably turn into soup very soon. Also, the weather for Sunday
doesn't look too great at this point either. Next scheduled launch is
February 11th, at the Pioneer Trail field.

Mark and I are currently setting up the MTMA's first meeting of 2001. The
meeting will be at, or around Janurary 29th. We've always had the meetings
on Mondays in the past, but, due to the fact that we have many more members
this year, I've set up a poll at egroups to find out from everyone what day
of the week would be best. If the day chosen is during the work week, the
meeting would obviously be held in the evening. Weekends tho', anything
goes! Please cast your vote at:

http://www.egroups.com/surveys/MTMA?id=492920

I'll close the poll on Sunday night, and we'll schedule the meeting on the
day that's chosen via the poll. The meeting will be at my house. Some
items for the agenda include electing officers (or electing to leave them
alone), electing a replacement for Randy, setting up a few building sessions
for 2001, establishing the 2001 launch and meeting schedule, and more.

Get those rockets built! Spring can't be too far away!

Tod


locked New poll for MTMA

MTMA@...
 

Enter your vote today! Check out the new poll for the MTMA
group:


What day of the week would be best to
hold MTMA meetings on?

o Monday
o Tuesday
o Wednesday
o Thursday
o Friday
o Saturday
o Sunday
o Other (just kidding!)


To vote, please visit the following web page:

http://www.egroups.com/polls/MTMA

Note: Please do not reply to this message. Poll votes are
not collected via email. To vote, you must go to the eGroups
web site listed above.

Thanks!


locked Re: Hello all

Mike & Karen <mleffler@...>
 

Hello Eric and welcome. Hopefully you signed up with E-Groups which the
group uses as our e-mail server. A reminder went out today concerning the
launch next weekend...weather permitting. I've been flying with MTMA for
about six months and you'd be hard pressed to find a more family oriented
group of people. I have a son turning 12 tomorrow and a daughter that is 9,
neither is a junior member. The great thing about a club is you can have an
adult (aka big kid) launching an H or I engine right along side a child with
an A engine, and be hard pressed to tell who's having more fun. Look
forward to meeting you and the family soon.

Mike Leffler

-----Original Message-----
From: Eric Erock68 Shaw [mailto:erock68@...]
Sent: Sunday, January 07, 2001 9:30 AM
To: MTMA@...
Subject: [MTMA] Hello all


Hello everyone. My name is Eric Shaw. I filled out an application on
your homepeage a few days ago. Was just wondering if I have been
accepted into the group?

I have an 11 yr old stepson (Adam) who received his first kits for
Christmas. Of course, I had to re-new my interest. Yes another B.A.R.
Currently working on mine this weekend. (Bull Pup, Big Daddy and Big
Bertha)

I was wondering if we may attend your launch on the 14th to see your
group and how you perform your launches. (actually meet all of you
too) I live in Aurora and the launch site is not far away at all.

As of now, I am not a member of the NAR but am going to join this
week. I had a question. Do those of you who have children also have
them as members of the NAR? If so, I will sign him up. I am just
going over the basics with him and why it is important to assemble
his kits correctly and to be patient. (yes he wants to get them done
quickly...lol)

For me, I do want to get into High power rocketry in the future.

Thanks for your time,

Eric


The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an e-mail
to:
MTMA-unsubscribe@...


locked Hello all

Eric Erock68 Shaw <erock68@...>
 

Hello everyone. My name is Eric Shaw. I filled out an application on
your homepeage a few days ago. Was just wondering if I have been
accepted into the group?

I have an 11 yr old stepson (Adam) who received his first kits for
Christmas. Of course, I had to re-new my interest. Yes another B.A.R.
Currently working on mine this weekend. (Bull Pup, Big Daddy and Big
Bertha)

I was wondering if we may attend your launch on the 14th to see your
group and how you perform your launches. (actually meet all of you
too) I live in Aurora and the launch site is not far away at all.

As of now, I am not a member of the NAR but am going to join this
week. I had a question. Do those of you who have children also have
them as members of the NAR? If so, I will sign him up. I am just
going over the basics with him and why it is important to assemble
his kits correctly and to be patient. (yes he wants to get them done
quickly...lol)

For me, I do want to get into High power rocketry in the future.

Thanks for your time,

Eric


locked Reminder - Launch at Pioneer Trail Field

MTMA@...
 

We would like to remind you of this upcoming event.

Launch at Pioneer Trail Field

Date: Sunday, January 14, 2001
Time: 9:00AM - 3:00PM EST (GMT-05:00)

West Pioneer Trail
Mantua Township, Portage County, Ohio
http://web.raex.com/~markndeb/rockets/mtma/ptmt.htm
Setup at 9:00 a.m.
Range opens at 10:00 a.m.


locked ROCKET STUFF SOLD

Randy Miller <rmiller40@...>
 

Hi everyone,

I have had a LOT of inquiries about the Rocket Stuff I had for sale. Barry
(LOC) purchased the whole thing... so I no longer have the stuff. Thank you
all for your inquiries and good luck.

Take Care
Randy


locked Re: please add new flyer Don Schjeldahl

Mike & Karen <mleffler@...>
 

Another victim (ChaaChing) eah Barry?

-----Original Message-----
From: Barry Lynch [mailto:belynch@...]
Sent: Thursday, January 04, 2001 1:11 PM
To: MTMA@...
Subject: [MTMA] please add new flyer Don Schjeldahl

Guys - I had a great call today from a local guy looking to fly with his son - told him about the group - can you add him to the group and inform him of our flying schedule?  He is primarily flying B&C motors but moving up to D with his Onyx - would be good to bring him in - He is from Kent - mantua1@...
Thanks
 
Barry E Lynch
locprecision@...


The main page for the MTMA group on eGroups is located at:
http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA


The message archive for the MTMA group is located at:
http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA


If you wish to have your name removed from the MTMA group, send an e-mail to:
MTMA-unsubscribe@...


locked please add new flyer Don Schjeldahl

Barry Lynch <belynch@...>
 

Guys - I had a great call today from a local guy looking to fly with his son - told him about the group - can you add him to the group and inform him of our flying schedule?  He is primarily flying B&C motors but moving up to D with his Onyx - would be good to bring him in - He is from Kent - mantua1@...
Thanks
 
Barry E Lynch
locprecision@...


locked Re: Moving On

Randy Miller <rmiller40@...>
 

Well, you can either come to my house in canton tomorrow or I can bring the
stuff to my work in south akron on friday... your choice.... just let me
know and I will give you directions to which ever you choose....

Thanks
Randy

----- Original Message -----
From: "Barry Lynch" <belynch@...>
To: <MTMA@...>
Sent: Wednesday, January 03, 2001 11:01 AM
Subject: Re: [MTMA] Moving On


Randy
I have a check for you for the whole amount-when/ where do you want to
swap?

barry -


----- Original Message -----
From: "Randy Miller" <rmiller40@...>
To: <MTMA@...>
Sent: Wednesday, January 03, 2001 6:42 AM
Subject: Re: [MTMA] Moving On


Well guys, I have the stuff all packed up.... just let me know... I
would
rather see the stuff go to MTMA.... just to let you know though... some
guys
from Tri-City have been inquiring as well....<G>

Take Care

Randy

----- Original Message -----
From: "Dale Purkey" <purkede@...>
To: <MTMA@...>
Sent: Wednesday, January 03, 2001 12:44 AM
Subject: Re: [MTMA] Moving On


Hi guys, Hey I will kick in 100.00 with Barry, If two more guys will.
We
could donate the launcher to the club, and divide up the other stuff.
Any
takers? Let me Know thanks, Dale
(Dibs on the 29 mm motor and the Minie Mag)
----- Original Message -----
From: Barry Lynch <belynch@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:55 PM
Subject: Re: [MTMA] Moving On


poo
don't give up on us yet!
your flights are too spectacular.
btw
I bet we could all pitch in and use this great stuff together! The
pad
alone is worth half or more of the asking price- I want to
contribute
my
$100 donation - any other takers? The club could use the rods and
launchers.
Barry
----- Original Message -----
From: "Randy Miller" <rmiller40@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:05 PM
Subject: [MTMA] Moving On


Hello all!! I hope everyone had a great holiday season. I would
just
like to tell everyone that over the last few years I have had a
great
time flying with MTMA and to see this group go from a few guys on
RMR
to a formal group of flyers has been awesome. This group had
really
grown and I am proud to have been a part of it.

Well now for the bad stuff. I am giving up the hobby of rocketry
to
pursue other interests. Unfortunatly I just don't have enough time
for the hobby anymore. Maybe someday I will get back into it..or
maybe become a knowledgable spectator.... Like someone else we
know
and love...LOL. Of course if I would get back into it in the
future
that would make me a BBAR?? I am officially resigning as MTMA
section advisor. Hey Tod.... I need to send you this advisor stuff
and the section certificate in the mail so send me your
address...<G>
Along with getting out of a hobby as intense as Rocketry goes
getting
rid of a bunch of stuff. The following is a list of everything
that
I
want to part with. I figured I would offer it to the group before
I
stuck it up on Ebay.... I won't sell the stuff individually
though...that is to much of a hassle... so it is for sell as a
bundle....Don't worry Stan, Your muli launch controller is not
listed
in this bundle....LOL...Oh and BTW... I know after my last two L2
attempts it does not seem like it, but my rockets are all build
and
painted well.... and all have flown several times...ask Stan..He
knows how I build them......and No comments Barry...<G>

Here is what I got: $400 takes all
Please feel free to email me if you have questions.
--------------------------------------------------------------------
Rocket Vision Quad Pad (high power pad)
1/4, 3/8, 1/2, and 1 inch launch rods... all 6' from Rocket
vision.
also some Estes rods

Sure Fire Nicad Launch controller with a zillion feet of cord.
(Has
never failed me and has ignited some pretty big Motors......)

Rockets:
2 LOC Auras - Build
Loc Mini Magg - Build
Loc Starburst - Build
Loc Graduator - Build
Loc Graduator - Unbuild
Loc Lil Nuke - Build
Loc Norad - Build
Loc Onyx - Build - Needs Nose Cone
2x Cherokee D (build from Loc parts)
PML Bull Puppy (partially constructed) all decals and parts are
there

Estes
Bull Pup - Unbuild
Alpha - Unbuild
2 Laser Torpedos - build
Ranger - build
Big Bertha - Build
Black Brant -Build
Avenger - build
Fatboy - Build
Silver Comet - Build
Firebird - Build
Vaughn Brother Sputnik - Unbuild
Quest Spin Fin - unbuild
Micro Scale Saturn 1B - unbuild

Dr Rocket RMS Motor Casings
1 set of 29mm closures
1 29/180 case
1 29/240 case
Areotech 29/40-120 RMS casing (never used)

RMS Motors
1 - F40-7w
1 - H97J -short
1 - G75J-medium
2 - H128W-short
One Shot Motors
2 - E30-4t
2 - E26-5
Various Estes motors 1/2As - Ds
several types of ignitors

Estes Catalogs 1972, 1983, and I Think a couple of others as well.
Some Estes Educator stuff
Magazines (sport rocketry, HP Rocketry, and Extream Rocketry)
LDRS and BALLs Videos (They are quality DUPES of Stan's Videos)

Various HP and MR pieces, parts, and other stuff
chutes
Nose Cones
Body tubes
Centering Rings
Motor adaptors
Motor tubes
shock cord material
Decals
anything else I find as I am packing up the stuff
--------------------------------------------------------

Well.... that about does it If you are interested send me an email

Take Care and happy new year
Randy
rmiller40@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...


The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...


The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an e-mail
to:
MTMA-unsubscribe@...


locked Re: Moving On

Dale Purkey <purkede@...>
 

Hello Barry, I see you are going for the stuff Randy is selling. I would
like to buy some of that stuff. Are you keeping the launcher or donating it
to MTMA ? I would kick in some bucks on the launcher either way. ( I'd
probably get to use it either way ) Can I put in my requests for some of the
stuff ? I'd like the 29 mm motors, the Mini Magg, the Pml Bull Puppy, and
what ever else you want to get rid of. Let me know... thanks Dale

----- Original Message -----
From: Barry Lynch <belynch@...>
To: <MTMA@...>
Sent: Wednesday, January 03, 2001 11:01 AM
Subject: Re: [MTMA] Moving On


Randy
I have a check for you for the whole amount-when/ where do you want to
swap?

barry -


----- Original Message -----
From: "Randy Miller" <rmiller40@...>
To: <MTMA@...>
Sent: Wednesday, January 03, 2001 6:42 AM
Subject: Re: [MTMA] Moving On


Well guys, I have the stuff all packed up.... just let me know... I
would
rather see the stuff go to MTMA.... just to let you know though... some
guys
from Tri-City have been inquiring as well....<G>

Take Care

Randy

----- Original Message -----
From: "Dale Purkey" <purkede@...>
To: <MTMA@...>
Sent: Wednesday, January 03, 2001 12:44 AM
Subject: Re: [MTMA] Moving On


Hi guys, Hey I will kick in 100.00 with Barry, If two more guys will.
We
could donate the launcher to the club, and divide up the other stuff.
Any
takers? Let me Know thanks, Dale
(Dibs on the 29 mm motor and the Minie Mag)
----- Original Message -----
From: Barry Lynch <belynch@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:55 PM
Subject: Re: [MTMA] Moving On


poo
don't give up on us yet!
your flights are too spectacular.
btw
I bet we could all pitch in and use this great stuff together! The
pad
alone is worth half or more of the asking price- I want to
contribute
my
$100 donation - any other takers? The club could use the rods and
launchers.
Barry
----- Original Message -----
From: "Randy Miller" <rmiller40@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:05 PM
Subject: [MTMA] Moving On


Hello all!! I hope everyone had a great holiday season. I would
just
like to tell everyone that over the last few years I have had a
great
time flying with MTMA and to see this group go from a few guys on
RMR
to a formal group of flyers has been awesome. This group had
really
grown and I am proud to have been a part of it.

Well now for the bad stuff. I am giving up the hobby of rocketry
to
pursue other interests. Unfortunatly I just don't have enough time
for the hobby anymore. Maybe someday I will get back into it..or
maybe become a knowledgable spectator.... Like someone else we
know
and love...LOL. Of course if I would get back into it in the
future
that would make me a BBAR?? I am officially resigning as MTMA
section advisor. Hey Tod.... I need to send you this advisor stuff
and the section certificate in the mail so send me your
address...<G>
Along with getting out of a hobby as intense as Rocketry goes
getting
rid of a bunch of stuff. The following is a list of everything
that
I
want to part with. I figured I would offer it to the group before
I
stuck it up on Ebay.... I won't sell the stuff individually
though...that is to much of a hassle... so it is for sell as a
bundle....Don't worry Stan, Your muli launch controller is not
listed
in this bundle....LOL...Oh and BTW... I know after my last two L2
attempts it does not seem like it, but my rockets are all build
and
painted well.... and all have flown several times...ask Stan..He
knows how I build them......and No comments Barry...<G>

Here is what I got: $400 takes all
Please feel free to email me if you have questions.
--------------------------------------------------------------------
Rocket Vision Quad Pad (high power pad)
1/4, 3/8, 1/2, and 1 inch launch rods... all 6' from Rocket
vision.
also some Estes rods

Sure Fire Nicad Launch controller with a zillion feet of cord.
(Has
never failed me and has ignited some pretty big Motors......)

Rockets:
2 LOC Auras - Build
Loc Mini Magg - Build
Loc Starburst - Build
Loc Graduator - Build
Loc Graduator - Unbuild
Loc Lil Nuke - Build
Loc Norad - Build
Loc Onyx - Build - Needs Nose Cone
2x Cherokee D (build from Loc parts)
PML Bull Puppy (partially constructed) all decals and parts are
there

Estes
Bull Pup - Unbuild
Alpha - Unbuild
2 Laser Torpedos - build
Ranger - build
Big Bertha - Build
Black Brant -Build
Avenger - build
Fatboy - Build
Silver Comet - Build
Firebird - Build
Vaughn Brother Sputnik - Unbuild
Quest Spin Fin - unbuild
Micro Scale Saturn 1B - unbuild

Dr Rocket RMS Motor Casings
1 set of 29mm closures
1 29/180 case
1 29/240 case
Areotech 29/40-120 RMS casing (never used)

RMS Motors
1 - F40-7w
1 - H97J -short
1 - G75J-medium
2 - H128W-short
One Shot Motors
2 - E30-4t
2 - E26-5
Various Estes motors 1/2As - Ds
several types of ignitors

Estes Catalogs 1972, 1983, and I Think a couple of others as well.
Some Estes Educator stuff
Magazines (sport rocketry, HP Rocketry, and Extream Rocketry)
LDRS and BALLs Videos (They are quality DUPES of Stan's Videos)

Various HP and MR pieces, parts, and other stuff
chutes
Nose Cones
Body tubes
Centering Rings
Motor adaptors
Motor tubes
shock cord material
Decals
anything else I find as I am packing up the stuff
--------------------------------------------------------

Well.... that about does it If you are interested send me an email

Take Care and happy new year
Randy
rmiller40@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...


The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...


The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an e-mail
to:
MTMA-unsubscribe@...



locked Re: Moving On

Barry Lynch <belynch@...>
 

Randy
I have a check for you for the whole amount-when/ where do you want to swap?

barry -

----- Original Message -----
From: "Randy Miller" <rmiller40@...>
To: <MTMA@...>
Sent: Wednesday, January 03, 2001 6:42 AM
Subject: Re: [MTMA] Moving On


Well guys, I have the stuff all packed up.... just let me know... I would
rather see the stuff go to MTMA.... just to let you know though... some
guys
from Tri-City have been inquiring as well....<G>

Take Care

Randy

----- Original Message -----
From: "Dale Purkey" <purkede@...>
To: <MTMA@...>
Sent: Wednesday, January 03, 2001 12:44 AM
Subject: Re: [MTMA] Moving On


Hi guys, Hey I will kick in 100.00 with Barry, If two more guys will. We
could donate the launcher to the club, and divide up the other stuff.
Any
takers? Let me Know thanks, Dale
(Dibs on the 29 mm motor and the Minie Mag)
----- Original Message -----
From: Barry Lynch <belynch@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:55 PM
Subject: Re: [MTMA] Moving On


poo
don't give up on us yet!
your flights are too spectacular.
btw
I bet we could all pitch in and use this great stuff together! The
pad
alone is worth half or more of the asking price- I want to contribute
my
$100 donation - any other takers? The club could use the rods and
launchers.
Barry
----- Original Message -----
From: "Randy Miller" <rmiller40@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:05 PM
Subject: [MTMA] Moving On


Hello all!! I hope everyone had a great holiday season. I would just
like to tell everyone that over the last few years I have had a
great
time flying with MTMA and to see this group go from a few guys on
RMR
to a formal group of flyers has been awesome. This group had really
grown and I am proud to have been a part of it.

Well now for the bad stuff. I am giving up the hobby of rocketry to
pursue other interests. Unfortunatly I just don't have enough time
for the hobby anymore. Maybe someday I will get back into it..or
maybe become a knowledgable spectator.... Like someone else we know
and love...LOL. Of course if I would get back into it in the future
that would make me a BBAR?? I am officially resigning as MTMA
section advisor. Hey Tod.... I need to send you this advisor stuff
and the section certificate in the mail so send me your
address...<G>
Along with getting out of a hobby as intense as Rocketry goes
getting
rid of a bunch of stuff. The following is a list of everything that
I
want to part with. I figured I would offer it to the group before I
stuck it up on Ebay.... I won't sell the stuff individually
though...that is to much of a hassle... so it is for sell as a
bundle....Don't worry Stan, Your muli launch controller is not
listed
in this bundle....LOL...Oh and BTW... I know after my last two L2
attempts it does not seem like it, but my rockets are all build and
painted well.... and all have flown several times...ask Stan..He
knows how I build them......and No comments Barry...<G>

Here is what I got: $400 takes all
Please feel free to email me if you have questions.
--------------------------------------------------------------------
Rocket Vision Quad Pad (high power pad)
1/4, 3/8, 1/2, and 1 inch launch rods... all 6' from Rocket vision.
also some Estes rods

Sure Fire Nicad Launch controller with a zillion feet of cord. (Has
never failed me and has ignited some pretty big Motors......)

Rockets:
2 LOC Auras - Build
Loc Mini Magg - Build
Loc Starburst - Build
Loc Graduator - Build
Loc Graduator - Unbuild
Loc Lil Nuke - Build
Loc Norad - Build
Loc Onyx - Build - Needs Nose Cone
2x Cherokee D (build from Loc parts)
PML Bull Puppy (partially constructed) all decals and parts are
there

Estes
Bull Pup - Unbuild
Alpha - Unbuild
2 Laser Torpedos - build
Ranger - build
Big Bertha - Build
Black Brant -Build
Avenger - build
Fatboy - Build
Silver Comet - Build
Firebird - Build
Vaughn Brother Sputnik - Unbuild
Quest Spin Fin - unbuild
Micro Scale Saturn 1B - unbuild

Dr Rocket RMS Motor Casings
1 set of 29mm closures
1 29/180 case
1 29/240 case
Areotech 29/40-120 RMS casing (never used)

RMS Motors
1 - F40-7w
1 - H97J -short
1 - G75J-medium
2 - H128W-short
One Shot Motors
2 - E30-4t
2 - E26-5
Various Estes motors 1/2As - Ds
several types of ignitors

Estes Catalogs 1972, 1983, and I Think a couple of others as well.
Some Estes Educator stuff
Magazines (sport rocketry, HP Rocketry, and Extream Rocketry)
LDRS and BALLs Videos (They are quality DUPES of Stan's Videos)

Various HP and MR pieces, parts, and other stuff
chutes
Nose Cones
Body tubes
Centering Rings
Motor adaptors
Motor tubes
shock cord material
Decals
anything else I find as I am packing up the stuff
--------------------------------------------------------

Well.... that about does it If you are interested send me an email

Take Care and happy new year
Randy
rmiller40@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...


The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an e-mail
to:
MTMA-unsubscribe@...


locked Re: Moving On

Tod Hilty
 

At 06:42 AM 1/3/01 -0500, Randy Miller wrote:
Well guys, I have the stuff all packed up.... just let me know... I would
rather see the stuff go to MTMA.... just to let you know though... some guys
from Tri-City have been inquiring as well....<G>
I'll try to contribute, as I'd like to see a lot of the stuff going to the
club, but, before I commit, the Hilty family needs to take an "inventory" of
outstanding holiday payables first. Don't want to hold up the sale tho'.
If it goes, it goes.

BTW, Kaplow is taking his annual flight survey on RMR if anyone wants to
contribute to his compilation. After going over all my 2000 flights, I was
surprised to see that I was actually *up* by 11 flights from 1999. It
seemed like I flew less.

Tod


locked Re: Moving On

Randy Miller <rmiller40@...>
 

Well guys, I have the stuff all packed up.... just let me know... I would
rather see the stuff go to MTMA.... just to let you know though... some guys
from Tri-City have been inquiring as well....<G>

Take Care

Randy

----- Original Message -----
From: "Dale Purkey" <purkede@...>
To: <MTMA@...>
Sent: Wednesday, January 03, 2001 12:44 AM
Subject: Re: [MTMA] Moving On


Hi guys, Hey I will kick in 100.00 with Barry, If two more guys will. We
could donate the launcher to the club, and divide up the other stuff. Any
takers? Let me Know thanks, Dale
(Dibs on the 29 mm motor and the Minie Mag)
----- Original Message -----
From: Barry Lynch <belynch@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:55 PM
Subject: Re: [MTMA] Moving On


poo
don't give up on us yet!
your flights are too spectacular.
btw
I bet we could all pitch in and use this great stuff together! The pad
alone is worth half or more of the asking price- I want to contribute my
$100 donation - any other takers? The club could use the rods and
launchers.
Barry
----- Original Message -----
From: "Randy Miller" <rmiller40@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:05 PM
Subject: [MTMA] Moving On


Hello all!! I hope everyone had a great holiday season. I would just
like to tell everyone that over the last few years I have had a great
time flying with MTMA and to see this group go from a few guys on RMR
to a formal group of flyers has been awesome. This group had really
grown and I am proud to have been a part of it.

Well now for the bad stuff. I am giving up the hobby of rocketry to
pursue other interests. Unfortunatly I just don't have enough time
for the hobby anymore. Maybe someday I will get back into it..or
maybe become a knowledgable spectator.... Like someone else we know
and love...LOL. Of course if I would get back into it in the future
that would make me a BBAR?? I am officially resigning as MTMA
section advisor. Hey Tod.... I need to send you this advisor stuff
and the section certificate in the mail so send me your address...<G>
Along with getting out of a hobby as intense as Rocketry goes getting
rid of a bunch of stuff. The following is a list of everything that I
want to part with. I figured I would offer it to the group before I
stuck it up on Ebay.... I won't sell the stuff individually
though...that is to much of a hassle... so it is for sell as a
bundle....Don't worry Stan, Your muli launch controller is not listed
in this bundle....LOL...Oh and BTW... I know after my last two L2
attempts it does not seem like it, but my rockets are all build and
painted well.... and all have flown several times...ask Stan..He
knows how I build them......and No comments Barry...<G>

Here is what I got: $400 takes all
Please feel free to email me if you have questions.
--------------------------------------------------------------------
Rocket Vision Quad Pad (high power pad)
1/4, 3/8, 1/2, and 1 inch launch rods... all 6' from Rocket vision.
also some Estes rods

Sure Fire Nicad Launch controller with a zillion feet of cord. (Has
never failed me and has ignited some pretty big Motors......)

Rockets:
2 LOC Auras - Build
Loc Mini Magg - Build
Loc Starburst - Build
Loc Graduator - Build
Loc Graduator - Unbuild
Loc Lil Nuke - Build
Loc Norad - Build
Loc Onyx - Build - Needs Nose Cone
2x Cherokee D (build from Loc parts)
PML Bull Puppy (partially constructed) all decals and parts are there

Estes
Bull Pup - Unbuild
Alpha - Unbuild
2 Laser Torpedos - build
Ranger - build
Big Bertha - Build
Black Brant -Build
Avenger - build
Fatboy - Build
Silver Comet - Build
Firebird - Build
Vaughn Brother Sputnik - Unbuild
Quest Spin Fin - unbuild
Micro Scale Saturn 1B - unbuild

Dr Rocket RMS Motor Casings
1 set of 29mm closures
1 29/180 case
1 29/240 case
Areotech 29/40-120 RMS casing (never used)

RMS Motors
1 - F40-7w
1 - H97J -short
1 - G75J-medium
2 - H128W-short
One Shot Motors
2 - E30-4t
2 - E26-5
Various Estes motors 1/2As - Ds
several types of ignitors

Estes Catalogs 1972, 1983, and I Think a couple of others as well.
Some Estes Educator stuff
Magazines (sport rocketry, HP Rocketry, and Extream Rocketry)
LDRS and BALLs Videos (They are quality DUPES of Stan's Videos)

Various HP and MR pieces, parts, and other stuff
chutes
Nose Cones
Body tubes
Centering Rings
Motor adaptors
Motor tubes
shock cord material
Decals
anything else I find as I am packing up the stuff
--------------------------------------------------------

Well.... that about does it If you are interested send me an email

Take Care and happy new year
Randy
rmiller40@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...


The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an e-mail
to:
MTMA-unsubscribe@...



locked Re: Moving On

Dale Purkey <purkede@...>
 

Hi guys, Hey I will kick in 100.00 with Barry, If two more guys will. We
could donate the launcher to the club, and divide up the other stuff. Any
takers? Let me Know thanks, Dale
(Dibs on the 29 mm motor and the Minie Mag)

----- Original Message -----
From: Barry Lynch <belynch@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:55 PM
Subject: Re: [MTMA] Moving On


poo
don't give up on us yet!
your flights are too spectacular.
btw
I bet we could all pitch in and use this great stuff together! The pad
alone is worth half or more of the asking price- I want to contribute my
$100 donation - any other takers? The club could use the rods and
launchers.
Barry
----- Original Message -----
From: "Randy Miller" <rmiller40@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:05 PM
Subject: [MTMA] Moving On


Hello all!! I hope everyone had a great holiday season. I would just
like to tell everyone that over the last few years I have had a great
time flying with MTMA and to see this group go from a few guys on RMR
to a formal group of flyers has been awesome. This group had really
grown and I am proud to have been a part of it.

Well now for the bad stuff. I am giving up the hobby of rocketry to
pursue other interests. Unfortunatly I just don't have enough time
for the hobby anymore. Maybe someday I will get back into it..or
maybe become a knowledgable spectator.... Like someone else we know
and love...LOL. Of course if I would get back into it in the future
that would make me a BBAR?? I am officially resigning as MTMA
section advisor. Hey Tod.... I need to send you this advisor stuff
and the section certificate in the mail so send me your address...<G>
Along with getting out of a hobby as intense as Rocketry goes getting
rid of a bunch of stuff. The following is a list of everything that I
want to part with. I figured I would offer it to the group before I
stuck it up on Ebay.... I won't sell the stuff individually
though...that is to much of a hassle... so it is for sell as a
bundle....Don't worry Stan, Your muli launch controller is not listed
in this bundle....LOL...Oh and BTW... I know after my last two L2
attempts it does not seem like it, but my rockets are all build and
painted well.... and all have flown several times...ask Stan..He
knows how I build them......and No comments Barry...<G>

Here is what I got: $400 takes all
Please feel free to email me if you have questions.
--------------------------------------------------------------------
Rocket Vision Quad Pad (high power pad)
1/4, 3/8, 1/2, and 1 inch launch rods... all 6' from Rocket vision.
also some Estes rods

Sure Fire Nicad Launch controller with a zillion feet of cord. (Has
never failed me and has ignited some pretty big Motors......)

Rockets:
2 LOC Auras - Build
Loc Mini Magg - Build
Loc Starburst - Build
Loc Graduator - Build
Loc Graduator - Unbuild
Loc Lil Nuke - Build
Loc Norad - Build
Loc Onyx - Build - Needs Nose Cone
2x Cherokee D (build from Loc parts)
PML Bull Puppy (partially constructed) all decals and parts are there

Estes
Bull Pup - Unbuild
Alpha - Unbuild
2 Laser Torpedos - build
Ranger - build
Big Bertha - Build
Black Brant -Build
Avenger - build
Fatboy - Build
Silver Comet - Build
Firebird - Build
Vaughn Brother Sputnik - Unbuild
Quest Spin Fin - unbuild
Micro Scale Saturn 1B - unbuild

Dr Rocket RMS Motor Casings
1 set of 29mm closures
1 29/180 case
1 29/240 case
Areotech 29/40-120 RMS casing (never used)

RMS Motors
1 - F40-7w
1 - H97J -short
1 - G75J-medium
2 - H128W-short
One Shot Motors
2 - E30-4t
2 - E26-5
Various Estes motors 1/2As - Ds
several types of ignitors

Estes Catalogs 1972, 1983, and I Think a couple of others as well.
Some Estes Educator stuff
Magazines (sport rocketry, HP Rocketry, and Extream Rocketry)
LDRS and BALLs Videos (They are quality DUPES of Stan's Videos)

Various HP and MR pieces, parts, and other stuff
chutes
Nose Cones
Body tubes
Centering Rings
Motor adaptors
Motor tubes
shock cord material
Decals
anything else I find as I am packing up the stuff
--------------------------------------------------------

Well.... that about does it If you are interested send me an email

Take Care and happy new year
Randy
rmiller40@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...


The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an e-mail
to:
MTMA-unsubscribe@...



locked Re: Moving On

Chuck Straka <castraka@...>
 

Sorry to see you go Randy (for now anyway, heh, heh!) best to you and
your family!

Barry's right on the need for launch equipment...I can't help
here...anybody?

Chuck Straka a.k.a. One Buck Chuck

--- In MTMA@..., "Barry Lynch" <belynch@m...> wrote:
poo
don't give up on us yet!
your flights are too spectacular.
btw
I bet we could all pitch in and use this great stuff together! The
pad
alone is worth half or more of the asking price- I want to
contribute my
$100 donation - any other takers? The club could use the rods and
launchers.
Barry
----- Original Message -----
From: "Randy Miller" <rmiller40@n...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:05 PM
Subject: [MTMA] Moving On


Hello all!! I hope everyone had a great holiday season. I would
just
like to tell everyone that over the last few years I have had a
great
time flying with MTMA and to see this group go from a few guys on
RMR
to a formal group of flyers has been awesome. This group had
really
grown and I am proud to have been a part of it.

Well now for the bad stuff. I am giving up the hobby of rocketry
to
pursue other interests. Unfortunatly I just don't have enough time
for the hobby anymore. Maybe someday I will get back into it..or
maybe become a knowledgable spectator.... Like someone else we
know
and love...LOL. Of course if I would get back into it in the
future
that would make me a BBAR?? I am officially resigning as MTMA
section advisor. Hey Tod.... I need to send you this advisor stuff
and the section certificate in the mail so send me your
address...<G>
Along with getting out of a hobby as intense as Rocketry goes
getting
rid of a bunch of stuff. The following is a list of everything
that I
want to part with. I figured I would offer it to the group before
I
stuck it up on Ebay.... I won't sell the stuff individually
though...that is to much of a hassle... so it is for sell as a
bundle....Don't worry Stan, Your muli launch controller is not
listed
in this bundle....LOL...Oh and BTW... I know after my last two L2
attempts it does not seem like it, but my rockets are all build
and
painted well.... and all have flown several times...ask Stan..He
knows how I build them......and No comments Barry...<G>

Here is what I got: $400 takes all
Please feel free to email me if you have questions.
------------------------------------------------------------------
--
Rocket Vision Quad Pad (high power pad)
1/4, 3/8, 1/2, and 1 inch launch rods... all 6' from Rocket
vision.
also some Estes rods

Sure Fire Nicad Launch controller with a zillion feet of cord.
(Has
never failed me and has ignited some pretty big Motors......)

Rockets:
2 LOC Auras - Build
Loc Mini Magg - Build
Loc Starburst - Build
Loc Graduator - Build
Loc Graduator - Unbuild
Loc Lil Nuke - Build
Loc Norad - Build
Loc Onyx - Build - Needs Nose Cone
2x Cherokee D (build from Loc parts)
PML Bull Puppy (partially constructed) all decals and parts are
there

Estes
Bull Pup - Unbuild
Alpha - Unbuild
2 Laser Torpedos - build
Ranger - build
Big Bertha - Build
Black Brant -Build
Avenger - build
Fatboy - Build
Silver Comet - Build
Firebird - Build
Vaughn Brother Sputnik - Unbuild
Quest Spin Fin - unbuild
Micro Scale Saturn 1B - unbuild

Dr Rocket RMS Motor Casings
1 set of 29mm closures
1 29/180 case
1 29/240 case
Areotech 29/40-120 RMS casing (never used)

RMS Motors
1 - F40-7w
1 - H97J -short
1 - G75J-medium
2 - H128W-short
One Shot Motors
2 - E30-4t
2 - E26-5
Various Estes motors 1/2As - Ds
several types of ignitors

Estes Catalogs 1972, 1983, and I Think a couple of others as well.
Some Estes Educator stuff
Magazines (sport rocketry, HP Rocketry, and Extream Rocketry)
LDRS and BALLs Videos (They are quality DUPES of Stan's Videos)

Various HP and MR pieces, parts, and other stuff
chutes
Nose Cones
Body tubes
Centering Rings
Motor adaptors
Motor tubes
shock cord material
Decals
anything else I find as I am packing up the stuff
--------------------------------------------------------

Well.... that about does it If you are interested send me an email

Take Care and happy new year
Randy
rmiller40@n...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send
an e-mail
to:
MTMA-unsubscribe@...


locked Re: Moving On

WanerDonald <WanerDonald@...>
 

Hello Barry, or Randy, This is Craig Lent I have an offer for you Barry
can take the launching stuff.and Craig will take the rest of it.$275.00
thats what craig will put in..Thank You Craig Lent....

----- Original Message -----
From: "Barry Lynch" <belynch@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:55 PM
Subject: Re: [MTMA] Moving On


poo
don't give up on us yet!
your flights are too spectacular.
btw
I bet we could all pitch in and use this great stuff together! The pad
alone is worth half or more of the asking price- I want to contribute my
$100 donation - any other takers? The club could use the rods and
launchers.
Barry
----- Original Message -----
From: "Randy Miller" <rmiller40@...>
To: <MTMA@...>
Sent: Monday, January 01, 2001 3:05 PM
Subject: [MTMA] Moving On


Hello all!! I hope everyone had a great holiday season. I would just
like to tell everyone that over the last few years I have had a great
time flying with MTMA and to see this group go from a few guys on RMR
to a formal group of flyers has been awesome. This group had really
grown and I am proud to have been a part of it.

Well now for the bad stuff. I am giving up the hobby of rocketry to
pursue other interests. Unfortunatly I just don't have enough time
for the hobby anymore. Maybe someday I will get back into it..or
maybe become a knowledgable spectator.... Like someone else we know
and love...LOL. Of course if I would get back into it in the future
that would make me a BBAR?? I am officially resigning as MTMA
section advisor. Hey Tod.... I need to send you this advisor stuff
and the section certificate in the mail so send me your address...<G>
Along with getting out of a hobby as intense as Rocketry goes getting
rid of a bunch of stuff. The following is a list of everything that I
want to part with. I figured I would offer it to the group before I
stuck it up on Ebay.... I won't sell the stuff individually
though...that is to much of a hassle... so it is for sell as a
bundle....Don't worry Stan, Your muli launch controller is not listed
in this bundle....LOL...Oh and BTW... I know after my last two L2
attempts it does not seem like it, but my rockets are all build and
painted well.... and all have flown several times...ask Stan..He
knows how I build them......and No comments Barry...<G>

Here is what I got: $400 takes all
Please feel free to email me if you have questions.
--------------------------------------------------------------------
Rocket Vision Quad Pad (high power pad)
1/4, 3/8, 1/2, and 1 inch launch rods... all 6' from Rocket vision.
also some Estes rods

Sure Fire Nicad Launch controller with a zillion feet of cord. (Has
never failed me and has ignited some pretty big Motors......)

Rockets:
2 LOC Auras - Build
Loc Mini Magg - Build
Loc Starburst - Build
Loc Graduator - Build
Loc Graduator - Unbuild
Loc Lil Nuke - Build
Loc Norad - Build
Loc Onyx - Build - Needs Nose Cone
2x Cherokee D (build from Loc parts)
PML Bull Puppy (partially constructed) all decals and parts are there

Estes
Bull Pup - Unbuild
Alpha - Unbuild
2 Laser Torpedos - build
Ranger - build
Big Bertha - Build
Black Brant -Build
Avenger - build
Fatboy - Build
Silver Comet - Build
Firebird - Build
Vaughn Brother Sputnik - Unbuild
Quest Spin Fin - unbuild
Micro Scale Saturn 1B - unbuild

Dr Rocket RMS Motor Casings
1 set of 29mm closures
1 29/180 case
1 29/240 case
Areotech 29/40-120 RMS casing (never used)

RMS Motors
1 - F40-7w
1 - H97J -short
1 - G75J-medium
2 - H128W-short
One Shot Motors
2 - E30-4t
2 - E26-5
Various Estes motors 1/2As - Ds
several types of ignitors

Estes Catalogs 1972, 1983, and I Think a couple of others as well.
Some Estes Educator stuff
Magazines (sport rocketry, HP Rocketry, and Extream Rocketry)
LDRS and BALLs Videos (They are quality DUPES of Stan's Videos)

Various HP and MR pieces, parts, and other stuff
chutes
Nose Cones
Body tubes
Centering Rings
Motor adaptors
Motor tubes
shock cord material
Decals
anything else I find as I am packing up the stuff
--------------------------------------------------------

Well.... that about does it If you are interested send me an email

Take Care and happy new year
Randy
rmiller40@...



The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an
e-mail
to:
MTMA-unsubscribe@...


The main page for the MTMA group on eGroups is located at:
<a href="http://www.egroups.com/group/MTMA">
http://www.egroups.com/group/MTMA
</a>

The message archive for the MTMA group is located at:
<a href="http://www.egroups.com/messages/MTMA">
http://www.egroups.com/messages/MTMA
</a>

If you wish to have your name removed from the MTMA group, send an e-mail
to:
MTMA-unsubscribe@...