Date   
locked Business Meeting

Wolfram v.Kiparski
 

Are we still having our usual  business meeting sometime during January 2018?

locked November Business Meeting

Wolfram v.Kiparski
 

We had a club business meeting last month.  Anyone even a bit curious what happened during that meeting, and what was decided?  Do we have meeting minutes?

locked Re: November Business Meeting

Tom Augustyn
 

I am new to the group and am interested. How was the Xmas party BTW...


-----Original Message-----
From: Wolfram v.Kiparski <astronwolf@...>
To: MTMA <MTMA@groups.io>
Sent: Tue, Dec 19, 2017 9:13 am
Subject: [MTMA] November Business Meeting

We had a club business meeting last month.  Anyone even a bit curious what happened during that meeting, and what was decided?  Do we have meeting minutes?

locked Re: Business Meeting

Jeff Kodysz
 

I believe we should. 

Jeff

On Dec 19, 2017, at 9:05 AM, Wolfram v.Kiparski <astronwolf@...> wrote:

Are we still having our usual  business meeting sometime during January 2018?

locked Re: Business Meeting

Wolfram v.Kiparski
 

 I have a work schedule for January to complete.  When will this meeting be?

On Dec 19, 2017 9:59 AM, Jeff Kodysz <jeffk813@...> wrote:
I believe we should. 

Jeff

On Dec 19, 2017, at 9:05 AM, Wolfram v.Kiparski <astronwolf@...> wrote:

Are we still having our usual  business meeting sometime during January 2018?

locked Re: Business Meeting

Jeff Kodysz
 

I propose January 13th (Saturday). It will likely be cold at the field. Do we want to meet elsewhere and does anyone have a suggestion?

On Dec 19, 2017, at 10:45 AM, Wolfram v.Kiparski <astronwolf@...> wrote:

 I have a work schedule for January to complete.  When will this meeting be?

On Dec 19, 2017 9:59 AM, Jeff Kodysz <jeffk813@...> wrote:
I believe we should. 

Jeff

On Dec 19, 2017, at 9:05 AM, Wolfram v.Kiparski <astronwolf@...> wrote:

Are we still having our usual  business meeting sometime during January 2018?

locked Re: Business Meeting

Wolfram v.Kiparski
 

I believe that we usually met on the second Saturday of January.  This date is good for me.  Earlier in the day is better than later.

We need a venue too.


On Dec 19, 2017 10:55 AM, Jeff Kodysz <jeffk813@...> wrote:
I propose January 13th (Saturday). It will likely be cold at the field. Do we want to meet elsewhere and does anyone have a suggestion?

On Dec 19, 2017, at 10:45 AM, Wolfram v.Kiparski <astronwolf@...> wrote:

 I have a work schedule for January to complete.  When will this meeting be?

On Dec 19, 2017 9:59 AM, Jeff Kodysz <jeffk813@...> wrote:
I believe we should. 

Jeff

On Dec 19, 2017, at 9:05 AM, Wolfram v.Kiparski <astronwolf@...> wrote:

Are we still having our usual  business meeting sometime during January 2018?


locked January 2018 MTMA club business meeting

Jeff Kodysz
 

Ladies and Gentlemen,

We will be holding our January 2018 club business meeting on Saturday, January 27th at 10:00 A.M. Our esteemed Vice President, John Ulizzi has graciously offered to host the meeting at his home as the weather at the field is likely to be crummy. The membership is encouraged to attend. We will be discussing several topics including the 2018 launch schedule. Also, Wolf will be doing an unboxing of a shiny, new fire extinguisher procured with the help of a NAR grant. 

John’s address is:

4757 Glastonbury Circle
Richmond Heights, Oh. 44143

After the meeting business is concluded, there will be a build party for anyone interested. If you’d like to hang out and build something, bring it out with tools and supplies. Nothing formal, just a bunch of big kids having fun in the off-season.

Feel free to contact me if there are any questions.

Jeff Kodysz

locked Event: MTMA Club Meeting - Saturday, 27 January 2018 #cal-invite

MTMA@groups.io Calendar <MTMA@...>
 

MTMA Club Meeting

When:
Saturday, 27 January 2018
12:00am to 10:00am
(GMT-05:00) America/New York

Where:
4757 Glastonbury Circle Richmond Heights, Oh. 44143 (John Ulizzi's House)

Organizer:
jeffk813@... 330-419-0031

Description:
The first MTMA club meeting of 2018 will be held at John Ulizzi's house on Saturday, January 27th at 10:00 AM until whenever. All club members are welcome (and encouraged) to attend. We will be discussing several pieces of important club business for the coming year, and an agenda will be posted soon. 

locked Re: Event: MTMA Club Meeting - Saturday, 27 January 2018 #cal-invite

Jim Seibyl
 

12 am to 10 am?????  Yikes!! Sounds like a marathon!! ;)

 

From: <MTMA@groups.io> on behalf of "MTMA@groups.io Calendar" <MTMA@groups.io>
Reply-To: <MTMA@groups.io>
Date: Friday, January 12, 2018 at 10:44 AM
To: <MTMA@groups.io>
Subject: [MTMA] Event: MTMA Club Meeting - Saturday, 27 January 2018 #cal-invite

 

MTMA Club Meeting

When:
Saturday, 27 January 2018
12:00am to 10:00am
(GMT-05:00) America/New York

Where:
4757 Glastonbury Circle Richmond Heights, Oh. 44143 (John Ulizzi's House)

Organizer:
jeffk813@... 330-419-0031

Description:
The first MTMA club meeting of 2018 will be held at John Ulizzi's house on Saturday, January 27th at 10:00 AM until whenever. All club members are welcome (and encouraged) to attend. We will be discussing several pieces of important club business for the coming year, and an agenda will be posted soon. 

locked Re: Event: MTMA Club Meeting - Saturday, 27 January 2018 #cal-invite

Jeff Kodysz
 

DOH! Let me fix that...


On Fri, Jan 12, 2018 at 11:22 AM, Jim Seibyl <jseibyl@...> wrote:

12 am to 10 am?????  Yikes!! Sounds like a marathon!! ;)

 

From: <MTMA@groups.io> on behalf of "MTMA@groups.io Calendar" <MTMA@groups.io>
Reply-To: <MTMA@groups.io>
Date: Friday, January 12, 2018 at 10:44 AM
To: <MTMA@groups.io>
Subject: [MTMA] Event: MTMA Club Meeting - Saturday, 27 January 2018 #cal-invite

 

MTMA Club Meeting

When:
Saturday, 27 January 2018
12:00am to 10:00am
(GMT-05:00) America/New York

Where:
4757 Glastonbury Circle Richmond Heights, Oh. 44143 (John Ulizzi's House)

Organizer:
jeffk813@... 330-419-0031

Description:
The first MTMA club meeting of 2018 will be held at John Ulizzi's house on Saturday, January 27th at 10:00 AM until whenever. All club members are welcome (and encouraged) to attend. We will be discussing several pieces of important club business for the coming year, and an agenda will be posted soon. 


locked Updated Event: MTMA Club Meeting - Saturday, 27 January 2018 #cal-invite

MTMA@groups.io Calendar <MTMA@...>
 

MTMA Club Meeting

When:
Saturday, 27 January 2018
10:00am to 12:00pm
(GMT-05:00) America/New York

Where:
4757 Glastonbury Circle Richmond Heights, Oh. 44143 (John Ulizzi's House)

Organizer:
jeffk813@... 330-419-0031

Description:
The first MTMA club meeting of 2018 will be held at John Ulizzi's house on Saturday, January 27th at 10:00 AM until whenever. All club members are welcome (and encouraged) to attend. We will be discussing several pieces of important club business for the coming year, and an agenda will be posted soon.

EDIT: I messed up the times... Fixed now. Sorry. :)

locked Re: Event: MTMA Club Meeting - Saturday, 27 January 2018 #cal-invite

John Ulizzi
 

We have a lot to cover, Jim… :-)

On Jan 12, 2018, at 11:22 AM, Jim Seibyl <jseibyl@...> wrote:

12 am to 10 am?????  Yikes!! Sounds like a marathon!! ;)
 
From: <MTMA@groups.io> on behalf of "MTMA@groups.io Calendar" <MTMA@groups.io>
Reply-To: <MTMA@groups.io>
Date: Friday, January 12, 2018 at 10:44 AM
To: <MTMA@groups.io>
Subject: [MTMA] Event: MTMA Club Meeting - Saturday, 27 January 2018 #cal-invite
 

MTMA Club Meeting

When:
Saturday, 27 January 2018
12:00am to 10:00am
(GMT-05:00) America/New York 

Where:
4757 Glastonbury Circle Richmond Heights, Oh. 44143 (John Ulizzi's House) 

Organizer:
jeffk813@... 330-419-0031

Description:
The first MTMA club meeting of 2018 will be held at John Ulizzi's house on Saturday, January 27th at 10:00 AM until whenever. All club members are welcome (and encouraged) to attend. We will be discussing several pieces of important club business for the coming year, and an agenda will be posted soon.  


locked Event: MTMA Launch Equipment Cleaning and Repair - Sunday, 11 February 2018 #cal-invite

MTMA@groups.io Calendar <MTMA@...>
 

MTMA Launch Equipment Cleaning and Repair

When:
Sunday, 11 February 2018
10:00am to 4:00pm
(GMT-05:00) America/New York

Where:
Mark's House

Organizer:
markrecktenwald@... 330-221-0823

Description:
On Sunday, February 11, 2018, at 10:00 am, we will meet at Mark's house to clean and repair the club's ground support equipment (launch pads, rods, rails, controllers, cables, ignitor clips and leads, etc.). Please bring whatever cleaning/repair tools and supplies you have that would be helpful (penetrating oil, sandpaper, steel wool, emery cloth, Scotch-Brite pads, wire brushes, soldering iron, etc.). If you think of anything else that would be useful, please bring it.

Mark has a corded 1/2" drill, a Dremel, a soldering iron, and lots of miscellaneous tools; but feel free to bring your own tools if you would like.

Mark's house has a full, un-finished basement so there is plenty of work space for everyone! Mark has lots of table space, but please throw a folding chair in your vehicle just in case he runs out of chairs.

Please reply to this message to let us know that you are coming so we can plan lunch.

locked Re: Event: MTMA Launch Equipment Cleaning and Repair - Sunday, 11 February 2018 #cal-invite

Tom Augustyn
 

Sorry, can't make it. Hope the Xmas party was fun!


-----Original Message-----
From: MTMA@groups.io Calendar <MTMA@groups.io>
To: MTMA <MTMA@groups.io>
Sent: Wed, Jan 31, 2018 4:38 pm
Subject: [MTMA] Event: MTMA Launch Equipment Cleaning and Repair - Sunday, 11 February 2018 #cal-invite

MTMA Launch Equipment Cleaning and Repair

When:
Sunday, 11 February 2018
10:00am to 4:00pm
(GMT-05:00) America/New York

Where:
Mark's House

Organizer:
markrecktenwald@... 330-221-0823

Description:
On Sunday, February 11, 2018, at 10:00 am, we will meet at Mark's house to clean and repair the club's ground support equipment (launch pads, rods, rails, controllers, cables, ignitor clips and leads, etc.). Please bring whatever cleaning/repair tools and supplies you have that would be helpful (penetrating oil, sandpaper, steel wool, emery cloth, Scotch-Brite pads, wire brushes, soldering iron, etc.). If you think of anything else that would be useful, please bring it.

Mark has a corded 1/2" drill, a Dremel, a soldering iron, and lots of miscellaneous tools; but feel free to bring your own tools if you would like.

Mark's house has a full, un-finished basement so there is plenty of work space for everyone! Mark has lots of table space, but please throw a folding chair in your vehicle just in case he runs out of chairs.

Please reply to this message to let us know that you are coming so we can plan lunch.

locked MTMA Launch Equipment Cleaning and Repair - Sun, 2/11/18 10:00am-4:00pm #cal-reminder

MTMA@groups.io Calendar <MTMA@...>
 

Reminder:
MTMA Launch Equipment Cleaning and Repair

When:
Sunday, 11 February 2018
10:00am to 4:00pm
(GMT-05:00) America/New York

Where:
2003 Stonebridge Xing, Stow, OH 44224

Description:
On Sunday, February 11, 2018, at 10:00 am, we will meet at Mark's house to clean and repair the club's ground support equipment (launch pads, rods, rails, controllers, cables, ignitor clips and leads, etc.). Please bring whatever cleaning/repair tools and supplies you have that would be helpful (penetrating oil, sandpaper, steel wool, emery cloth, Scotch-Brite pads, wire brushes, soldering iron, etc.). If you think of anything else that would be useful, please bring it.

Mark has a corded 1/2" drill, a Dremel, a soldering iron, and lots of miscellaneous tools; but feel free to bring your own tools if you would like.

Mark's house has a full, un-finished basement so there is plenty of work space for everyone! Mark has lots of table space, but please throw a folding chair in your vehicle just in case he runs out of chairs.

Please reply to this message to let us know that you are coming so we can plan lunch.

View Event.

locked Re: MTMA Launch Equipment Cleaning and Repair - Sun, 2/11/18 10:00am-4:00pm #cal-reminder

Gary Stricker
 

I plan on being there




On Friday, February 2, 2018, 10:00 AM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Launch Equipment Cleaning and Repair

When:
Sunday, 11 February 2018
10:00am to 4:00pm
(GMT-05:00) America/New York

Where:
2003 Stonebridge Xing, Stow, OH 44224

Description:
On Sunday, February 11, 2018, at 10:00 am, we will meet at Mark's house to clean and repair the club's ground support equipment (launch pads, rods, rails, controllers, cables, ignitor clips and leads, etc.). Please bring whatever cleaning/repair tools and supplies you have that would be helpful (penetrating oil, sandpaper, steel wool, emery cloth, Scotch-Brite pads, wire brushes, soldering iron, etc.). If you think of anything else that would be useful, please bring it.

Mark has a corded 1/2" drill, a Dremel, a soldering iron, and lots of miscellaneous tools; but feel free to bring your own tools if you would like.

Mark's house has a full, un-finished basement so there is plenty of work space for everyone! Mark has lots of table space, but please throw a folding chair in your vehicle just in case he runs out of chairs.

Please reply to this message to let us know that you are coming so we can plan lunch.

View Event.

locked Re: MTMA Launch Equipment Cleaning and Repair - Sun, 2/11/18 10:00am-4:00pm #cal-reminder

Wolfram v.Kiparski
 

I bought some Estes blast deflectors for the club.  They're meant to replace the big plaster things we have been using as deflectors.

locked MTMA Launch Equipment Cleaning and Repair - Sun, 2/11/18 10:00am-4:00pm #cal-reminder

MTMA@groups.io Calendar <MTMA@...>
 

Reminder:
MTMA Launch Equipment Cleaning and Repair

When:
Sunday, 11 February 2018
10:00am to 4:00pm
(GMT-05:00) America/New York

Where:
2003 Stonebridge Xing, Stow, OH 44224

Description:
*****************************************************************************************************************************************
PLEASE REPLY TO THIS MESSAGE TO LET US KNOW THAT YOU ARE COMING SO THAT WE CAN PLAN LUNCH.
*****************************************************************************************************************************************

On Sunday, February 11, 2018, at 10:00 am, we will meet at Mark's house to clean and repair the club's ground support equipment (launch pads, rods, rails, controllers, cables, igniter clips and leads, etc.). Please bring whatever cleaning/repair tools and supplies you have that would be helpful (penetrating oil, sandpaper, steel wool, emery cloth, Scotch-Brite pads, wire brushes, soldering iron, etc.). If you think of anything else that would be useful, please bring it.

Mark has a corded 1/2" drill, a Dremel, a soldering iron, and lots of miscellaneous hand tools; but feel free to bring your own tools if you would like.

Mark's house has a full, un-finished basement so there is plenty of work space for everyone! Mark has lots of table space, but please throw a folding chair in your vehicle just in case he runs out of chairs.

View Event.

locked Re: MTMA Launch Equipment Cleaning and Repair - Sun, 2/11/18 10:00am-4:00pm #cal-reminder

Jeff Kodysz
 

I will be there along with the youngster.

Jeff

On Fri, Feb 9, 2018 at 10:00 AM, MTMA@groups.io Calendar <MTMA@groups.io> wrote:

Reminder:
MTMA Launch Equipment Cleaning and Repair

When:
Sunday, 11 February 2018
10:00am to 4:00pm
(GMT-05:00) America/New York

Where:
2003 Stonebridge Xing, Stow, OH 44224

Description:
*****************************************************************************************************************************************
PLEASE REPLY TO THIS MESSAGE TO LET US KNOW THAT YOU ARE COMING SO THAT WE CAN PLAN LUNCH.
*****************************************************************************************************************************************

On Sunday, February 11, 2018, at 10:00 am, we will meet at Mark's house to clean and repair the club's ground support equipment (launch pads, rods, rails, controllers, cables, igniter clips and leads, etc.). Please bring whatever cleaning/repair tools and supplies you have that would be helpful (penetrating oil, sandpaper, steel wool, emery cloth, Scotch-Brite pads, wire brushes, soldering iron, etc.). If you think of anything else that would be useful, please bring it.

Mark has a corded 1/2" drill, a Dremel, a soldering iron, and lots of miscellaneous hand tools; but feel free to bring your own tools if you would like.

Mark's house has a full, un-finished basement so there is plenty of work space for everyone! Mark has lots of table space, but please throw a folding chair in your vehicle just in case he runs out of chairs.

View Event.